Hey for Leduc Alberta - The 1947 - Present Chevrolet & GMC Truck Message Board Network

juice03 · 08-23-2010, 11:12 AM

Just want to say hello, I'm a new guy around here. Like alot of other forums I know it's almost manditory to introduce yourself, so her I am.
So here is a little about me, I'm from Leduc,AB Canada. Welder/hot rod builder is my occupation. Currently have 11 classics (not enough) and searching for more. Honest truth, this 69 chevy is the only classic I have not built.
I have a 1969 Chevy shortbox 396 with factory A/C, just picked this truck up about a week ago. I'm a hot rod guy but this one fits in just nice with the rest of my cars.
So here is the low down of the 69. It's a fresh 396, 40 over with mild cam, headers. 700R4 Trans with 3000 stall converter and eaton posi with 3.43 gears. This truck came from California in 2002, still the same paint from 10 + years ago. Truck has been lowered 2 in the front and 4 in the rear. I plan to give it a fresh copper/black paintjob this winter and dress up the interior.

Anyhow hope to chat in the future and trade some ideas.
Mike

Burb · 08-23-2010, 12:26 PM

Welcome from Texas, USA.

rocknss · 08-23-2010, 11:34 PM

Welcome to the board!

geezer#99 · 08-24-2010, 10:04 AM

Welcome from the west coast. It's almost mandatory to also include PICS of your truck too!!!
Enjoy the best forum.

FRENCHBLUE72 · 08-24-2010, 10:11 AM

Welcome to the board from southern oregon...

juice03 · 08-24-2010, 10:40 AM

Quote:

Originally Posted by geezer#99

Welcome from the west coast. It's almost mandatory to also include PICS of your truck too!!!
Enjoy the best forum.

Pictures will come, right now all I have taken pictures of is the exterior. I'll get some of the motor today.

juice03 · 08-24-2010, 06:23 PM

Here are a couple pictures of my truck.

63sbssbbw · 08-30-2010, 04:54 PM

That is one sweet lookin' truck Mike
Welcome to the forum.
From closer to saskatchewan than I care to be LOL
Trent

**N2TRUX** · 08-30-2010, 05:10 PM

Looks like a great truck to start with. Keep us posted on your progress....

juice03 · 08-30-2010, 08:44 PM

Quote:

Originally Posted by 63sbssbbw

That is one sweet lookin' truck Mike
Welcome to the forum.
From closer to saskatchewan than I care to be LOL
Trent

This 69 came from Llyodminster just 2 weeks ago I picked it up from there. Suprised you never seen this truck there, guy by the name of Chris owned. Traded my 2000 Vette for this truck straight across. To me it was a decent trade since I couldn't stand the vette.

Jerry Jones · 08-31-2010, 03:22 PM

Very nice truck.

Welcome aboard from Northern California!

juice03 · 08-31-2010, 07:22 PM

Quote:

Originally Posted by Jerry Jones

Very nice truck.

Welcome aboard from Northern California!

Thanks for the welcome, this truck came from your state in 2002. Just pulled the import papers out, it says from LA, California and I have the license plate that it was last registered there with. You guys have good taste in vehicles down there.

Jerry Jones · 09-01-2010, 12:46 AM

We turn out some good rust free rigs from here for sure... although you would not know it by looking at my '68... LOL

juice03 · 09-01-2010, 12:53 AM

lmao, I looked at a 61 Impala from San Fran. about a year ago. Found it on Ebay and flew down to check it out. Biggest bondo bucket I have ever seen I think. Floors were gone and some bent up a stop sign to fill the floor, quarters were installed pourly and they used rivets.
It was a good thing I also made a vacation out of the trip cause that was the biggest waste of 2hrs I spent on that trip.
But there are some really nice rust free even still original classics around more in Cali then up here in Cananda.

1ATony · 09-02-2010, 01:20 PM

welcome Mike, great looking truck.

63sbssbbw · 09-06-2010, 09:52 AM

Can't say I've seen it Mike,but then again I don't get out much,LOL
There's a few really nice 67-72's here
I see you've joined the CDN Rodder ranks as well
(I still think your gonna have to cut a long one,not many of those shorts left in these parts LOL).
T

juice03 · 09-06-2010, 10:21 AM

Quote:

Originally Posted by 63sbssbbw

Can't say I've seen it Mike,but then again I don't get out much,LOL
There's a few really nice 67-72's here
I see you've joined the CDN Rodder ranks as well
(I still think your gonna have to cut a long one,not many of those shorts left in these parts LOL).
T

I've been on Canadian Rodder for 2-3 years. Alot of my projects are on there.

Nodak mack · 09-06-2010, 08:07 PM

nice looking truck.

08-23-2010, 11:12 AM	#1
juice03 Registered User Join Date: Aug 2010 Location: Leduc, Alberta Posts: 35	Hey for Leduc Alberta Just want to say hello, I'm a new guy around here. Like alot of other forums I know it's almost manditory to introduce yourself, so her I am. So here is a little about me, I'm from Leduc,AB Canada. Welder/hot rod builder is my occupation. Currently have 11 classics (not enough) and searching for more. Honest truth, this 69 chevy is the only classic I have not built. I have a 1969 Chevy shortbox 396 with factory A/C, just picked this truck up about a week ago. I'm a hot rod guy but this one fits in just nice with the rest of my cars. So here is the low down of the 69. It's a fresh 396, 40 over with mild cam, headers. 700R4 Trans with 3000 stall converter and eaton posi with 3.43 gears. This truck came from California in 2002, still the same paint from 10 + years ago. Truck has been lowered 2 in the front and 4 in the rear. I plan to give it a fresh copper/black paintjob this winter and dress up the interior. Anyhow hope to chat in the future and trade some ideas. Mike Last edited by juice03; 08-23-2010 at 11:13 AM.

08-23-2010, 12:26 PM	#2
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: Hey for Leduc Alberta Welcome from Texas, USA. __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

08-23-2010, 11:34 PM	#3
rocknss Registered User Join Date: Oct 2004 Location: Milwaukee, WI Posts: 403	Re: Hey for Leduc Alberta Welcome to the board!

08-24-2010, 10:04 AM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,732	Re: Hey for Leduc Alberta Welcome from the west coast. It's almost mandatory to also include PICS of your truck too!!! Enjoy the best forum.

08-24-2010, 10:11 AM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Hey for Leduc Alberta Welcome to the board from southern oregon... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-24-2010, 06:23 PM	#7
juice03 Registered User Join Date: Aug 2010 Location: Leduc, Alberta Posts: 35	Re: Hey for Leduc Alberta Here are a couple pictures of my truck. __________________ Mike 1969 Chevy C/10 shortbox, built 396 with factory a/c, 700R4 with eaton posi trac and 3.43's 1968 Chevy C/30 project, in progress. 1967 GMC 1/2t longbox 1935 Chevy Master Coach Prostreet 1936 Chevy Master Coach 1952 Chevy Coupe 1950 Pontiac Cheiftan

08-30-2010, 04:54 PM	#8
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: Hey for Leduc Alberta That is one sweet lookin' truck Mike Welcome to the forum. From closer to saskatchewan than I care to be LOL Trent __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

08-30-2010, 05:10 PM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Hey for Leduc Alberta Looks like a great truck to start with. Keep us posted on your progress.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-31-2010, 03:22 PM	#11
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: Hey for Leduc Alberta Very nice truck. Welcome aboard from Northern California! __________________ RIP El Jay! Love you brother!

09-01-2010, 12:46 AM	#13
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: Hey for Leduc Alberta We turn out some good rust free rigs from here for sure... although you would not know it by looking at my '68... LOL __________________ RIP El Jay! Love you brother!

09-01-2010, 12:53 AM	#14
juice03 Registered User Join Date: Aug 2010 Location: Leduc, Alberta Posts: 35	Re: Hey for Leduc Alberta lmao, I looked at a 61 Impala from San Fran. about a year ago. Found it on Ebay and flew down to check it out. Biggest bondo bucket I have ever seen I think. Floors were gone and some bent up a stop sign to fill the floor, quarters were installed pourly and they used rivets. It was a good thing I also made a vacation out of the trip cause that was the biggest waste of 2hrs I spent on that trip. But there are some really nice rust free even still original classics around more in Cali then up here in Cananda. __________________ Mike 1969 Chevy C/10 shortbox, built 396 with factory a/c, 700R4 with eaton posi trac and 3.43's 1968 Chevy C/30 project, in progress. 1967 GMC 1/2t longbox 1935 Chevy Master Coach Prostreet 1936 Chevy Master Coach 1952 Chevy Coupe 1950 Pontiac Cheiftan

09-02-2010, 01:20 PM	#15
1ATony Registered User Join Date: Oct 2009 Location: Pepperell,Mass Posts: 724	Re: Hey for Leduc Alberta welcome Mike, great looking truck.

09-06-2010, 09:52 AM	#16
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: Hey for Leduc Alberta Can't say I've seen it Mike,but then again I don't get out much,LOL There's a few really nice 67-72's here I see you've joined the CDN Rodder ranks as well (I still think your gonna have to cut a long one,not many of those shorts left in these parts LOL). T __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

09-06-2010, 08:07 PM	#18
Nodak mack Registered User Join Date: Aug 2010 Location: Deering north dakota. Posts: 28	Re: Hey for Leduc Alberta nice looking truck.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.