|
08-23-2010, 10:24 PM
|
#1 |
|
Registered User
Join Date: Jul 2010
Location: phoenix az
Posts: 60
|
ball joints
has anyone done ball joints for 60-62 and what is up with 340 dollars for ball joints. does any one know were to get them cheaper.
|
|
|
|
08-23-2010, 11:50 PM
|
#2 |
|
Registered User
Join Date: Nov 2008
Location: Elk Grove Ca
Posts: 629
|
Re: ball joints
yet another reason people do the c-member swap ball joints for the 78 19.95 the entire c-member was 150
|
|
|
|
|
08-24-2010, 01:08 AM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: ball joints
 Sounds like a good time to upgrade to front disc brakes......
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
08-24-2010, 02:45 PM
|
#4 |
|
Registered User
Join Date: Mar 2003
Location: San Francisco, CA USA
Posts: 2,454
|
Re: ball joints
If you are willing to give up the T-bars, the cheap fix is the crossmember swap already mentioned. Unfortunately, there is no easy solution if you want to keep the stock suspension, which is what I want to do.
I have seen one truck where an obviously expert welder cut off the outer ends of the stock control arms and welded on the ends from a later truck. Clearly, this is not for the faint of heart, but if you can find someone with the necessary skills to do the job, I would say go for it. Ray |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
