Stopping in to say hey from Prescott AZ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMR-PERFORMANCE · 08-31-2010, 02:25 PM

Been reading for about a year and have found time to get my 62 back on track. 3 years into it with a frame off.

A few highlights

383 stroker engine, RHS billet heads Carrillo rods, cp pistons, 850 DP race demon, back with a tremec TKO 600 trans close ratio 1-4 with a .64 OD for the hwy( best of both worlds) 3.90 rear gear

Oak bed polished SS strips, in the process of adding the disc brakes hydro boost ( engine has less than 4 inches of vacuum) and PS.

Here is a link to the pics I need to update it, all panels are jammed and I am getting ready to pre fit everything and shim before paint.

A bit about me

I own a custom shop for harleys most of my days are spent building engines or tuning them with the crew. Do our own machine work in house ( me) fab work, normal service work.. Cant wait to get my truck back on the road..

http://good-times.webshots.com/album...-times&start=0

Jerry Jones · 08-31-2010, 03:02 PM

Looks really good.

Welcome aboard from Northern California!

**70cst** · 08-31-2010, 04:46 PM

Very nice work!

Oh yes

and

from Ohio.

1ATony · 08-31-2010, 04:58 PM

welcome to the site.

08-31-2010, 02:25 PM	#1
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Stopping in to say hey from Prescott AZ Been reading for about a year and have found time to get my 62 back on track. 3 years into it with a frame off. A few highlights 383 stroker engine, RHS billet heads Carrillo rods, cp pistons, 850 DP race demon, back with a tremec TKO 600 trans close ratio 1-4 with a .64 OD for the hwy( best of both worlds) 3.90 rear gear Oak bed polished SS strips, in the process of adding the disc brakes hydro boost ( engine has less than 4 inches of vacuum) and PS. Here is a link to the pics I need to update it, all panels are jammed and I am getting ready to pre fit everything and shim before paint. A bit about me I own a custom shop for harleys most of my days are spent building engines or tuning them with the crew. Do our own machine work in house ( me) fab work, normal service work.. Cant wait to get my truck back on the road.. http://good-times.webshots.com/album...-times&start=0 Last edited by GMR-PERFORMANCE; 08-31-2010 at 02:30 PM.

08-31-2010, 03:02 PM	#2
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: Stopping in to say hey from Prescott AZ Looks really good. Welcome aboard from Northern California! __________________ RIP El Jay! Love you brother!

08-31-2010, 04:46 PM	#3
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Stopping in to say hey from Prescott AZ Very nice work! Oh yes and from Ohio. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-31-2010, 04:58 PM	#4
1ATony Registered User Join Date: Oct 2009 Location: Pepperell,Mass Posts: 724	Re: Stopping in to say hey from Prescott AZ welcome to the site.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.