10-29-2010, 12:25 AM | #1 |
Registered User
Join Date: Oct 2010
Location: yucaipa,ca
Posts: 41
|
Just bought a 73 c10
I just bought a 73 2wd c10 lwb, got it for $1000, not too bad considering the prices that trucks are going for in cali lately. it has a 350, th400, and a 10-bolt rear end. the color is hideous, but some sanding and primer is going to fix that in the near future. ill be sure to put up some before pictures.
Im just curious what ideas you guys have for any easy power/performance options. I would like to swap heads and cam, it runs really well, i think the bottom end is pretty solid so most of my engine mods will be up top. any info on simple fixes/power upgrades would be appreciated. id also like to lift it a little, nothing crazy just 4" at most. any ideas on how to go about it would also be appreciated, i understand that in order to do most of the aftermarket spindle lift kits you have to swap for 88+ control arms.. is that correct? thanks in advance Lee |
10-29-2010, 12:40 AM | #2 |
Account Suspended
Join Date: Dec 2008
Location: Huntsville,AL
Posts: 2,119
|
Re: Just bought a 73 c10
welcome to the site. congrats on the buy. have any pics?
|
10-29-2010, 12:46 AM | #3 |
6.0 powered square
Join Date: Feb 2008
Location: Mesquite texas
Posts: 3,459
|
Re: Just bought a 73 c10
this was a friends truck it had a 3" body lift and 1 ton coils 235/85-16s
__________________
Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 |
10-29-2010, 03:22 PM | #4 |
Registered User
Join Date: Oct 2010
Location: yucaipa,ca
Posts: 41
|
Re: Just bought a 73 c10
Here's some pictures, I told you guys, the color is awful.. this will be one of my first fixes.
|
10-29-2010, 03:24 PM | #5 |
Registered User
Join Date: Oct 2010
Location: yucaipa,ca
Posts: 41
|
Re: Just bought a 73 c10
and here are a couple pictures of the engine.. its a 350, it looks pretty bad.. but it runs strong.. im in the process of getting a new carb, the fuel filter cover was stripped out..
|
10-29-2010, 03:39 PM | #6 |
Registered User
Join Date: Jul 2010
Location: memphis
Posts: 2,537
|
Re: Just bought a 73 c10
welcome & i dig tha color
|
10-29-2010, 03:54 PM | #7 |
Registered User
Join Date: Jan 2010
Location: Louisiana
Posts: 127
|
Re: Just bought a 73 c10
Why replace the Q-jet? That's one of the best carbs ever built. IMO.
__________________
79 C-20 Scottsdale 350/400 3:73 gears 9 leafs and a headache rack (I speak English, thank you) |
10-29-2010, 03:56 PM | #8 |
Registered User
Join Date: Jan 2010
Location: Louisiana
Posts: 127
|
Re: Just bought a 73 c10
That spacer on the carb is off of a TBI engine. I think a 6 banger. Leave it for sure. I put one on my 79 with the 350 and it helped out on the power. I would definantely put an open element air cleaner with a K&N filter.
__________________
79 C-20 Scottsdale 350/400 3:73 gears 9 leafs and a headache rack (I speak English, thank you) |
10-29-2010, 04:40 PM | #9 |
Registered User
Join Date: Jun 2010
Location: windsor
Posts: 290
|
Re: Just bought a 73 c10
I personally love that green, kinda like a 70 camaro. What are the brackets welded to the bed for ? Is it 2 or 4 wheel drive ? if it is 2 wheel why raise it ?
|
10-29-2010, 06:35 PM | #10 |
Registered User
Join Date: Jun 2010
Location: Pittsburgh PA
Posts: 686
|
Re: Just bought a 73 c10
not bad. welcome
__________________
86 Suburban 2WD = rolled it and totaled it 83 LWB STD Cab 4x4 = went to the scrapper. Was my baby. 84 Suburban 2WD = stripped it/ scrapped it 81 8 foot bed made into a trailer 86 Suburban going to be made into a trailer 91 Suburban 4x4 = that's my baby 00 S10 Xtreme STD Cab 01 S10 ZR2 |
10-29-2010, 07:08 PM | #11 |
Desert Rat
Join Date: Jul 2010
Location: Mojave Desert
Posts: 169
|
Re: Just bought a 73 c10
Its a 73 so its smog exempt. I'd deal with an ugly color for no more smog!
|
10-29-2010, 07:30 PM | #12 |
Registered User
Join Date: Oct 2010
Location: yucaipa,ca
Posts: 41
|
Re: Just bought a 73 c10
Oleblue79- I plan on keeping the q-jet.. i was just gonna get a rebuilt.. but i was able to make this one work so I won't have to replace it..
SSdeluxe- the brakets are from a 5th wheel setup the p.o. had.. I'm giving those back.. and it is 2wd.. I dont like the look of lowered or stock height longbeds.. so I'm just goin to replace the stock springs with 1tons and block the rear.. the stock susp is sagging so much that it has that raked look... Posted via Mobile Device |
10-29-2010, 07:39 PM | #13 |
Registered User
Join Date: Oct 2010
Location: yucaipa,ca
Posts: 41
|
Re: Just bought a 73 c10
Oleblue79- I plan on keeping the q-jet.. i was just gonna get a rebuilt.. but i was able to make this one work so I won't have to replace it..
SSdeluxe- the brakets are from a 5th wheel setup the p.o. had.. I'm giving those back.. and it is 2wd.. I dont like the look of lowered or stock height longbeds.. so I'm just goin to replace the stock springs with 1tons and block the rear.. the stock susp is sagging so much that it has that raked look... Posted via Mobile Device |
10-30-2010, 05:11 PM | #14 |
Registered User
Join Date: Jun 2010
Location: Green bay, Wisconsin
Posts: 593
|
Re: Just bought a 73 c10
2 wheel drives arent meant to lifted.
__________________
1979 GMC Sierra Classic Freshly lowered 5 inches |
10-30-2010, 09:36 PM | #15 |
Registered User
Join Date: Oct 2010
Location: yucaipa,ca
Posts: 41
|
Re: Just bought a 73 c10
then dont lift yours
|
10-30-2010, 09:46 PM | #16 |
Registered User
Join Date: May 2010
Location: Reno Ne-VAH-da
Posts: 594
|
Re: Just bought a 73 c10
|
10-31-2010, 12:48 PM | #17 |
Getting Old; Going Broke
Join Date: Apr 2010
Location: Owasso OK
Posts: 2,764
|
Re: Just bought a 73 c10
I like the color on it as well for some odd reason, it snaps well in my opinion. The original red would look good as well though, just a matter of opinion on what you want.
I put heavy duty springs on the front of my 1/2 ton LWB, brought the front end up level with the rear. I like the look of it going "up" rather than bringing the rear down, again just personal choice though. My '74 I will be bringing down, a first for everything I suppose. In the end, the only persons opinion that really matters is yours.
__________________
Why is every used 350 sbc out of a corvette? There's only two things that excite a man, expensive toys and real expensive toys. VEGETARIAN: That's an old Indian word meaning "I don't hunt so good." When the going gets tough, switch to power tools. |
10-31-2010, 02:05 PM | #18 |
Registered User
Join Date: Sep 2010
Location: Greensboro, NC.
Posts: 42
|
Re: Just bought a 73 c10
I just bought an 81 C10 swb 2wd...Theres really no point to lift a truck thats 2wd. 2wd are meant to be either left alone or dropped an inch or 2. If you lift it you'll wanna drive like its a 4wd and that could be bad...I agree with the majority of this forum. Leave the color. just polish it up a little. It looks like you need to work on the motor before you even think about touching the paint. I have a 350 with a Q-jet with electronic choke and it runs great. Just put a 2.75 x 14" K&N on there and it runs even better. I also suggest the open element.
|
10-31-2010, 02:37 PM | #19 |
Registered User
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
|
Re: Just bought a 73 c10
cool truck......welcome to the best website ever!
|
10-31-2010, 02:49 PM | #20 |
Registered User
Join Date: Aug 2010
Location: Temple TX
Posts: 24
|
Re: Just bought a 73 c10
I lifted my 86 2wd 6" 3" body and 3" suspension running 35's. I really loved the look but had no use for 4wd. Know hate body lifts because of that truck and would never use one again but it acheivd my goals and looked killer after I raised the front bumper to match. I say do it and don't worry bout the people that don't get it.
|
10-31-2010, 09:17 PM | #21 |
Registered User
Join Date: Oct 2010
Location: yucaipa,ca
Posts: 41
|
Re: Just bought a 73 c10
i understand where everyone is coming from as far as lifting a 2wd truck.. but if u think that just because its a 2wd truck it wont ever be going off road, or even carrying a heavy load.. think again.. its nice to have a little ground clearane in alot of situations.. this isnt going to be a show truck by any means.. it will be a mostly a daily driver and for hauling things around... if i was going to do a nice show truck then yea it would be either stock height or lowered a bit.. but anyone who has ever owned a truck should know that they were meant to be functional.. so sorry if u dont like that i want a little ground clearance on my truck, but again.. if you dont want to lift your 2wd then dont..
to each his own... |
10-31-2010, 09:49 PM | #22 | |
regular everyday normal guy
Join Date: Aug 2009
Location: SW Ontario, Canada
Posts: 125
|
Re: Just bought a 73 c10
Quote:
__________________
-Andrew- 1987 Chevrolet V10 SM465 NP208 w/ '89 454 dual plane hi-rise 750cfm 1407 w/ '86 10b /14b new motor on the way: GM#990 heads 25cc speed pro pistons COMP XE 274h crane gold rollers |
|
10-31-2010, 11:59 PM | #23 |
Registered User
Join Date: Oct 2010
Location: yucaipa,ca
Posts: 41
|
Re: Just bought a 73 c10
yea.. i think im gonna go ahead and update the original color. I really like the new gm red jewel tintcoat which is kind of a metallic maroon and i think im gonna end up going that route in the future. but for now im just going to sand down to the original paint and primer over it..
|
11-01-2010, 09:55 AM | #24 |
1962 C-10
Join Date: Apr 2005
Location: Las Vegas, New Mexico
Posts: 4,978
|
Re: Just bought a 73 c10
Welcome from Santa Fe, NM. Cool truck. I am also a fan of that green. My '73 was originally that color as well. I changed it, but later on it grew on me. I may go back one day. Also, was that truck originally a 454 truck? I see it has the emblem on the grille.
Can't wait to see what you do with it.
__________________
Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 |
11-01-2010, 09:59 AM | #25 |
Registered User
Join Date: Dec 2008
Location: Silverhill, Al
Posts: 2,026
|
Re: Just bought a 73 c10
welcome bro! i dig the color also...very nice find!
__________________
Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|