|
11-06-2010, 05:50 PM
|
#1 |
|
Registered User
Join Date: Jun 2009
Location: Winnipeg, MB Canada
Posts: 31
|
62' Pinion Angle
Hey everyone I'm in the middle of swapping rear ends from a 78 chevy half ton and I just need to know what the pinion angle on the 62 trucks would be. I've heard it's anywhere from 3 to 7 degrees but I want to make sure what it is. Thanks
|
|
|
|
11-06-2010, 08:17 PM
|
#2 |
|
Registered User
Join Date: Sep 2009
Location: Marianna, Florida
Posts: 339
|
Re: 62' Pinion Angle
I am setting mine at -2. Or down 2 whatever you want to call it. This is gonna really depend on what the truck is being set up to do. Mine is more hot street / race than cruise. Looking forward to other responses.
Posted via Mobile Device
__________________
Slowly but surely getting it done. |
|
|
|
|
11-07-2010, 01:33 AM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 62' Pinion Angle
Is this on a longbed or shortbed? Does your truck have coils and trailing arms, or leafs? If it is a shortbed, I would say your pinion should be parallel with the transmission output shaft at ride height. If you have trailing arms and coils, the pinion should be 4 degrees up from the trailing arm mounts.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
11-07-2010, 12:56 PM
|
#4 |
|
Registered User
Join Date: Jun 2009
Location: Winnipeg, MB Canada
Posts: 31
|
Re: 62' Pinion Angle
I have a Long box with trailing arms and coils. I'm setting it up for stock ride height as well, Thanks
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
