11-09-2010, 03:58 PM | #1 |
Registered User
Join Date: Sep 2008
Location: hamilton ontario
Posts: 10
|
1959 GMC wiring
I have Installed a 350 with hei ignition in my 1959 GMC p/u, I was wondering if someone could help me out with the wiring or were i can find a wiring diagram. the harness is in good shape so I want to use as much of it as possible and also the new engine came with an alternator and i am not sure how to wire it in to the system. any help would be greatly appreciated.
Thanks |
11-09-2010, 04:55 PM | #2 |
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: 1959 GMC wiring
Here is a basic original diagram. At home I have a more detailed one from the factory assy manual. The hei needs a switched 12v wire (does not go thru the resistor) looks like the one from the ING2 post at the ignition switch that does not go thru the resistor might work. Check it with a multimeter to see if it is getting constant 12V. Can't help on the alternator, depends on the type (single wire, multi wire with internal regulator, multi wire with external regulator). A search here turned up a number of threads but it depends on the type you have.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
11-09-2010, 09:09 PM | #3 |
Senior Member
Join Date: Nov 2008
Location: Fannystelle, Manitoba, Canada
Posts: 853
|
Re: 1959 GMC wiring
Here is a basic GM alt wiring.
__________________
Jean-Marc Lacasse 57 GMC 55 GMC 55 Belair 99 S10 http://67-72chevytrucks.com/vboard/s...d.php?t=316140 http://67-72chevytrucks.com/vboard/s...d.php?t=806011 |
11-10-2010, 12:15 AM | #4 |
Registered User
Join Date: Sep 2008
Location: hamilton ontario
Posts: 10
|
Re: 1959 GMC wiring
thanks for the help, I was able to fire it up tonight and will work on charging system tomorrow
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|