|
11-17-2010, 11:47 PM
|
#1 |
|
Master Procrastinator
Join Date: Sep 2009
Location: Grande Prairie AB Canada
Posts: 1,128
|
Lower control arms??
I have my uppers installed so they look even and no clearance problems, but how do I get the lowers centered? this will obviously be going for an alignment before it's driven just making my chassis a roller, does it really matter at this point? they have indents on them for what I would assum is a centering bolt but the perches are factory riveted in? any help would be appreciated
__________________
 My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=39550620 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project |
|
|
|
11-18-2010, 12:31 AM
|
#2 |
|
someday it will be done!
Join Date: Sep 2004
Location: Lloydminster,AB. Canada
Posts: 1,620
|
Re: Lower control arms??
That indent in the control arm mates with a nub inside the front control arm saddle.
__________________
'72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore.    '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics |
|
|
|
|
11-18-2010, 02:29 AM
|
#3 |
|
Master Procrastinator
Join Date: Sep 2009
Location: Grande Prairie AB Canada
Posts: 1,128
|
Re: Lower control arms??
it doesn't seem to fit in is the issue, factory nubs/rivets may be worn down or i'm missing something, they seemed to bolt in fine and look even just seemed to have play prior to tightening, alignment shop will figure it out I'm sure
__________________
My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=39550620 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
