|
12-15-2010, 10:35 AM
|
#1 |
|
Registered User
Join Date: Dec 2010
Location: Ft. Riley Kansas
Posts: 5
|
Blower or no blower?
Hello everyone, I heav a question and am open to any ideas, comments, facts or even tell me I am nuts. I have an 86 shortbed fleetside silverado. I'm thinking of putting a 540 Bower motor in it can anyone give me any info on rather to go with or without the blower? It is a show track might see the track once or twice just to get a time slip. I will eithe rbe pushing 750+ without or 1000+ with any ideas info anything would be much appreciated. Thanks to all who read n more thanks to all those who reply.
|
|
|
|
12-15-2010, 10:51 AM
|
#2 |
|
One shot, one kill.
Join Date: Dec 2007
Location: Saratoga Springs NY
Posts: 859
|
Re: Blower or no blower?
Blown, in my opinion a blower is not a good idea unless the eng was built from the bottom up for a blower. The compression ratio of a blown eng is lower than non-blown. If you are just going to run it once in a while over the quarter mile, get a good nitros setup and use that as a booster, BUT, be careful of how much nitros you inject, it could have the same effect as an eng with to high comp ratio and a blower, IE, GRENADE!!! jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot  Jim or Paladin whichever you choose.
|
|
|
|
|
12-15-2010, 11:16 AM
|
#3 |
|
Registered User
Join Date: Dec 2010
Location: Burleson, Texas
Posts: 596
|
Re: Blower or no blower?
Arent these trucks already hard enough to get to hook up?
__________________
Allengator Outta the Blue (my band - available for hire in the DFW area!) 1980 Chevy SWB Pickup (build thread) 1951 Chevy Sedan Delivery 2004 Chevy Tahoe Z71 2011 Harley Davidson Street Glide 2018 Silverado Z71 Crew Cab |
|
|
|
|
12-15-2010, 11:22 AM
|
#4 |
|
Registered User
Join Date: Dec 2010
Location: Ft. Riley Kansas
Posts: 5
|
Re: Blower or no blower?
well i am getting a brand new motown block and it is a brand new turn key im having a machine shop build for me. i guess one thing i was wondering is if back halfing n putting in a fourlink n tubbing with some big mickey thompsons would help
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
