gauging interest, anyone interested in a 73-87 key rack? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock73 · 01-05-2011, 12:43 AM

OK, started working on this little project, and am nearly complete, just waiting for a quote from the machine shop on what it will cost to produce these.

These are 73-87 key racks, 14" wide (height varies) they are made of 16 ga steel, come ready to paint, are laser cut, and wall mount (mounting hardware included). You can paint these one color, or custom paint to match your personal trucks colors.

I have designed trucks (fleetside and stepside), Dooleys, Blazers and Suburbans...all in lowered or slightly lifted designes.

I attached a couple examples below.

I am assuming these will run $30-$35 plus shipping, but that depends on the quote.

Let me know what you think, or if you are potentially interested after reading all this. Feedback is always welcomed.

Colesnsty68 · 01-05-2011, 01:03 AM

Those are amazing.

bluex · 01-05-2011, 02:16 AM

These are cool, although not what I was hoping for from the teaser you posted earlier.

Any thoughts on shrinking them down for key chains???

Gordonr1973 · 01-05-2011, 02:33 AM

Yes for sure I'd like one!

ElGracho · 01-05-2011, 09:12 AM

I'm in for the dually one if you make it...

RandyP · 01-05-2011, 10:14 AM

I'd probably buy at least two if they resembled a C10/K10 stock stance. It'd look awesome in my office actually. I could replace my 25 year old MAC Tool truck keyboard.

1tonchevy · 01-05-2011, 10:47 AM

Looks awesome! Pic of the lowered dually?

yellowGT · 01-05-2011, 01:45 PM

any plans of making some 67-68 chevy front view?

bigblock73 · 01-05-2011, 02:24 PM

Quote:

Originally Posted by bluex

These are cool, although not what I was hoping for from the teaser you posted earlier.

Any thoughts on shrinking them down for key chains???

Paul, at the moment, no. But it is something I will look into in the near future.

bigblock73 · 01-05-2011, 02:25 PM

Quote:

Originally Posted by 1tonchevy

Looks awesome! Pic of the lowered dually?

The one I posted is the lowered variety...should it be slammed as opposed to dropped?

GCncsuHD · 01-05-2011, 02:50 PM

I would be interested in the lifted Dually variety.

moneyeater · 01-05-2011, 04:07 PM

Those are cool!
i like the idea!
Volker

1tonchevy · 01-05-2011, 04:10 PM

Quote:

Originally Posted by bigblock73

The one I posted is the lowered variety...should it be slammed as opposed to dropped?

My eyes must have been playing tricks on me hahah i like the one you posted looks great!

yellowGT · 01-05-2011, 06:16 PM

Quote:

Originally Posted by 1tonchevy

My eyes must have been playing tricks on me hahah i like the one you posted looks great!

Back bumper would look nice if truck sat just below the arrow line to where you can just see enough of the tires. Ill get one of those then.

DBLSPRT68 · 01-05-2011, 06:31 PM

Yes, I would like a Fleetside (stock or slightly lifted) Please. These are very cool Jeff. You are Awesome! Let me know. David

**old Rusty C10** · 01-05-2011, 09:56 PM

those are pretty cool i may snatch one up for my shop upstate...

Pop's C-10 · 01-05-2011, 10:56 PM

cool idea

SBTork · 01-05-2011, 11:17 PM

I would buy up a barn door'd style suburban if you plan on having a design for that.

bigblock73 · 01-05-2011, 11:24 PM

Quote:

Originally Posted by SBTork

I would buy up a barn door'd style suburban if you plan on having a design for that.

Already have those done

Greenlee · 01-06-2011, 12:52 AM

I'd like to buy the slightly lifted stepside version. I bought a pair of your speaker brackets a couple of years ago and they turned out great.

Posted via Mobile Device

bluex · 01-06-2011, 02:06 AM

Quote:

Originally Posted by bigblock73

Paul, at the moment, no. But it is something I will look into in the near future.

IMO the dullay one looks perfect as is.

I'll probably get one to hang something from anyway, just would have a hard time deciding which version. A keychain would be awesome though....

SBTork · 01-06-2011, 04:05 AM

Quote:

Originally Posted by bigblock73

Already have those done

sweet. You may have to bring one with you when we meet, soon, hopefully....

monza1979 · 01-06-2011, 10:24 AM

mark me down for a slightly lifted fleet, these are awesome!!

ghettoluxury · 01-07-2011, 10:56 PM

Quote:

Originally Posted by bigblock73

The one I posted is the lowered variety...should it be slammed as opposed to dropped?

I would like one slammed

01-05-2011, 12:43 AM	#1
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	gauging interest, anyone interested in a 73-87 key rack? OK, started working on this little project, and am nearly complete, just waiting for a quote from the machine shop on what it will cost to produce these. These are 73-87 key racks, 14" wide (height varies) they are made of 16 ga steel, come ready to paint, are laser cut, and wall mount (mounting hardware included). You can paint these one color, or custom paint to match your personal trucks colors. I have designed trucks (fleetside and stepside), Dooleys, Blazers and Suburbans...all in lowered or slightly lifted designes. I attached a couple examples below. I am assuming these will run $30-$35 plus shipping, but that depends on the quote. Let me know what you think, or if you are potentially interested after reading all this. Feedback is always welcomed. Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-05-2011, 01:03 AM	#2
Colesnsty68 Registered User Join Date: Jun 2009 Location: Arvada, Colorado Posts: 210	Re: gauging interes, anyone interested in a 73-87 key rack? Those are amazing. __________________ 1970 Chevrolet custom camper 20 2000 F@$d F250 Powerjoke "And i still like bologna on white bread now and then" -Alan Jackson

01-05-2011, 02:16 AM	#3
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Re: gauging interest, anyone interested in a 73-87 key rack? These are cool, although not what I was hoping for from the teaser you posted earlier. Any thoughts on shrinking them down for key chains??? __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

01-05-2011, 02:33 AM	#4
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: gauging interest, anyone interested in a 73-87 key rack? Yes for sure I'd like one! __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

01-05-2011, 09:12 AM	#5
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Re: gauging interest, anyone interested in a 73-87 key rack? I'm in for the dually one if you make it... __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

01-05-2011, 10:14 AM	#6
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: gauging interest, anyone interested in a 73-87 key rack? I'd probably buy at least two if they resembled a C10/K10 stock stance. It'd look awesome in my office actually. I could replace my 25 year old MAC Tool truck keyboard. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

01-05-2011, 10:47 AM	#7
1tonchevy C35 Crew Dually Join Date: Nov 2008 Location: Belleville Ontario Posts: 1,116	Re: gauging interest, anyone interested in a 73-87 key rack? Looks awesome! Pic of the lowered dually? __________________ If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892

01-05-2011, 01:45 PM	#8
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: gauging interest, anyone interested in a 73-87 key rack? any plans of making some 67-68 chevy front view? __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

01-05-2011, 02:50 PM	#11
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: gauging interest, anyone interested in a 73-87 key rack? I would be interested in the lifted Dually variety. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s

01-05-2011, 04:07 PM	#12
moneyeater Registered User Join Date: Feb 2003 Location: Northern Germany,near Bremen Posts: 684	Re: gauging interest, anyone interested in a 73-87 key rack? Those are cool! i like the idea! Volker __________________ My little US vehicle parts business: http://www.thegearheaddepot.com/ Come have a look! ´81 GMC C 10, Spanish Red

01-05-2011, 06:31 PM	#15
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: gauging interest, anyone interested in a 73-87 key rack? Yes, I would like a Fleetside (stock or slightly lifted) Please. These are very cool Jeff. You are Awesome! Let me know. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

01-05-2011, 09:56 PM	#16
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: gauging interest, anyone interested in a 73-87 key rack? those are pretty cool i may snatch one up for my shop upstate... __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-05-2011, 10:56 PM	#17
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: gauging interest, anyone interested in a 73-87 key rack? cool idea

01-05-2011, 11:17 PM	#18
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: gauging interest, anyone interested in a 73-87 key rack? I would buy up a barn door'd style suburban if you plan on having a design for that. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

01-06-2011, 12:52 AM	#20
Greenlee Registered User Join Date: Jun 2004 Location: El Lago, TX Posts: 1,668	Re: gauging interest, anyone interested in a 73-87 key rack? I'd like to buy the slightly lifted stepside version. I bought a pair of your speaker brackets a couple of years ago and they turned out great. Posted via Mobile Device



Register or Log In To remove these advertisements.

01-06-2011, 10:24 AM	#23
monza1979 Registered User Join Date: Jul 2010 Location: Sammamish Wa Posts: 38	Re: gauging interest, anyone interested in a 73-87 key rack? mark me down for a slightly lifted fleet, these are awesome!! __________________ I had the right to remain silent, but i didn't have the ability! 78 chevy swb 4x4 sm465 np205 350 4" lift, ORD flip kit, ORD Ext. brake lines 79 Chevy Monza:current plans, dz 302, 4 speed 69 Pontiac Firebird: 74 s.d. 455 build up, m22 rock crusher

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.