lets see your eagle alloys 225!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bbbc10 · 01-12-2011, 11:49 AM

just like the title says..lets see your eagle alloys 225 and your drop an tire size. thanx

benscool1 · 01-17-2011, 10:00 AM

I agree, let's see em!
Posted via Mobile Device

muthstryker · 01-17-2011, 05:09 PM

I dont have them anymore but here ya go..

6/8 Drop
20x8.5 Front Nitto INVO 245/35/20
20x10 Rear Nitto INVO 295/35/20

And heres one with the truck sitting level due to a pallet full of wood in the bed!

LivNLo94 · 02-15-2011, 08:59 AM

DJM 5/5 Kit, Belltech Nitro Drop 2 Shocks, 295/30ZR20 Rear, 255/35ZR20 Front
Rides Nice! I might cut the springs and add shackles....

*JCampbell* · 02-05-2013, 08:39 PM

TTT !
Posted via Mobile Device

*JCampbell* · 06-13-2013, 04:58 PM

Where did you guys get your 225s? Thinking about picking up a set.

osaltyone · 06-14-2013, 11:10 AM

Was trying to get a set, but they don't have the backspacing I need in stock. Every vendor I spoke with says on back order with no date for shipping in the backspacing I wanted...
Posted via Mobile Device

*JCampbell* · 06-14-2013, 11:42 AM

Hmmm...

Kinda torn. It's between these and the Boss 335's. Currently leaning toward the 335s.

osaltyone · 06-14-2013, 12:47 PM

That is what I ended up with. Have to have my rotors machined down though because the bore on the 20x8.5 is tight. I like the look of the 225s better though.
Posted via Mobile Device

Jmiller022 · 06-14-2013, 12:54 PM

I had these on my 68! but am trying to replace/sell them now but cant find any info on them other than they are eagle alloys.

Are they the 225?? They look a lot like them except mine have the rivet look.

UKNOWME · 06-29-2015, 12:26 AM

Here's mine...
20x8.5 275/40r20
20x10 295/40r20

Malo83 · 06-29-2015, 02:35 AM

Nice looking rides

Jstock85 · 09-05-2016, 02:24 PM

UKNOWME

You mind sharing a few details on your lowering job?

Thanks!

UKNOWME · 09-05-2016, 02:54 PM

Quote:

Originally Posted by Jstock85

UKNOWME

You mind sharing a few details on your lowering job?

Thanks!

Front is Belltech 3" coils and McGaughys 2" spindles
Rear McGaughys Flip kit with Belltech Shackles

lime1982 · 09-06-2016, 11:10 PM

Quote:

Originally Posted by muthstryker

I dont have them anymore but here ya go..

6/8 Drop
20x8.5 Front Nitto INVO 245/35/20
20x10 Rear Nitto INVO 295/35/20

And heres one with the truck sitting level due to a pallet full of wood in the bed!

Did you have to remove engine bay splash gaurds or cut rear wheel wells with this combination of tires wheels / drop .because this is the same setup I'm working on for my truck waiting for rims to be delivered now.

01-12-2011, 11:49 AM	#1
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	lets see your eagle alloys 225!! just like the title says..lets see your eagle alloys 225 and your drop an tire size. thanx

01-17-2011, 10:00 AM	#2
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Re: lets see your eagle alloys 225!! I agree, let's see em! Posted via Mobile Device __________________ Ben 84 C10 Silverado 14 Silverado Z71

01-17-2011, 05:09 PM	#3
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: lets see your eagle alloys 225!! I dont have them anymore but here ya go.. 6/8 Drop 20x8.5 Front Nitto INVO 245/35/20 20x10 Rear Nitto INVO 295/35/20 And heres one with the truck sitting level due to a pallet full of wood in the bed! Last edited by muthstryker; 01-17-2011 at 05:10 PM.

02-15-2011, 08:59 AM	#4
LivNLo94 Registered User Join Date: Jun 2010 Location: Odessa TX Posts: 83	Re: lets see your eagle alloys 225!! DJM 5/5 Kit, Belltech Nitro Drop 2 Shocks, 295/30ZR20 Rear, 255/35ZR20 Front Rides Nice! I might cut the springs and add shackles....

02-05-2013, 08:39 PM	#5
JCampbell Account Suspended Join Date: Apr 2008 Location: Hesperia, Ca Posts: 1,332	Re: lets see your eagle alloys 225!! TTT ! Posted via Mobile Device

06-13-2013, 04:58 PM	#6
JCampbell Account Suspended Join Date: Apr 2008 Location: Hesperia, Ca Posts: 1,332	Re: lets see your eagle alloys 225!! Where did you guys get your 225s? Thinking about picking up a set.

06-14-2013, 11:10 AM	#7
osaltyone Registered User Join Date: Jun 2009 Location: Corona, ca Posts: 406	Re: lets see your eagle alloys 225!! Was trying to get a set, but they don't have the backspacing I need in stock. Every vendor I spoke with says on back order with no date for shipping in the backspacing I wanted... Posted via Mobile Device

06-14-2013, 11:42 AM	#8
JCampbell Account Suspended Join Date: Apr 2008 Location: Hesperia, Ca Posts: 1,332	Re: lets see your eagle alloys 225!! Hmmm... Kinda torn. It's between these and the Boss 335's. Currently leaning toward the 335s.

06-14-2013, 12:47 PM	#9
osaltyone Registered User Join Date: Jun 2009 Location: Corona, ca Posts: 406	Re: lets see your eagle alloys 225!! That is what I ended up with. Have to have my rotors machined down though because the bore on the 20x8.5 is tight. I like the look of the 225s better though. Posted via Mobile Device

06-14-2013, 12:54 PM	#10
Jmiller022 Registered User Join Date: Apr 2013 Location: Douglasville, Ga Posts: 212	Re: lets see your eagle alloys 225!! I had these on my 68! but am trying to replace/sell them now but cant find any info on them other than they are eagle alloys. Are they the 225?? They look a lot like them except mine have the rivet look. __________________ 68' c10 stepper 5.3/4L60e Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=578917

06-29-2015, 12:26 AM	#11
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: lets see your eagle alloys 225!! Here's mine... 20x8.5 275/40r20 20x10 295/40r20 __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

06-29-2015, 02:35 AM	#12
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: lets see your eagle alloys 225!! Nice looking rides

09-05-2016, 02:24 PM	#13
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: lets see your eagle alloys 225!! UKNOWME You mind sharing a few details on your lowering job? Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.