CA 88 chevy suburban 1/2ton 2wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevybuldr · 01-16-2011, 01:05 PM

Just got this for the motor/tranny 5.7/700r4 for my 70 GMC. Its TBI has cargo doors power everything. Its seen a tough life but in decent shape. Tell me what you are looking for and I will try to get it off as fast as possible.

Tilt column nice and tight w/o wheel 125.00 + shipping
Dash bezel un cut 35.00 + shipping
Jack 25.00 + shipping
Rear view mirror 15.00 + shipping
Wiper Motor 10.00 + shipping

chevybuldr · 01-16-2011, 01:23 PM

Aaa

**bigunde** · 01-16-2011, 02:03 PM

what are you asking for the pair of chrome outside mirrors and the radio?

Big Port Jimmy 6 · 01-16-2011, 03:21 PM

What about the wheel arch moldings, overflow tank and washer reservoir? Jay

SBTork · 01-16-2011, 04:19 PM

how much for the grille, front and rear door panels, rear speaker grilles, and rear cargo door panels/plastic trim? If you're willing to ship, I am very serious.

chevybuldr · 01-16-2011, 09:15 PM

Quote:

Originally Posted by bigunde

what are you asking for the pair of chrome outside mirrors and the radio?

I would like 50.00 for the radio. It works and comes with the mounting braket. Mirrors are nice. I would like 25.00 for those. I would need a zip for shipping.

chevybuldr · 01-16-2011, 09:19 PM

Quote:

Originally Posted by Big Port Jimmy 6

What about the wheel arch moldings, overflow tank and washer reservoir? Jay

The wheel moldings are dented up. The washer reservoir is broken. The pump works. The overflow tank is new I think. 15.00 for the tank. Please send zip for shipping.

chevybuldr · 01-16-2011, 09:43 PM

Quote:

Originally Posted by SBTork

how much for the grille, front and rear door panels, rear speaker grilles, and rear cargo door panels/plastic trim? If you're willing to ship, I am very serious.

I got the grill out and I cant find any broken spots. I am kinda nervous shipping somthing so big and fragile.

I need to know how much of the door panels do you want? Just the panels with nothing attached? Do you want the inserts? The brush panel inserts have broken tabs. The velour inserts are not very good. The panels are typical scratched. The front drivers is starting to fade on the the top but not chauky.

the rear cargo doors, how much do you want the top and bottoms? the bottoms are ok need a good cleaning. The tops are scratched and the passanger side one is cracked in one spot. The panels are go around the side were the 2 doors come together are broken and no good.

The speaker grills are very good shape. 20.00 for both.

I need a shipping address to figure shipping and let me know how much you want of the panels.

coater · 01-16-2011, 10:37 PM

How much for the temperature control unit? Would like to have the rear bumper,but sure shipping would be crazy! Zip 31763

Big Port Jimmy 6 · 01-16-2011, 10:48 PM

Quote:

Originally Posted by chevybuldr

The wheel moldings are dented up. The washer reservoir is broken. The pump works. The overflow tank is new I think. 15.00 for the tank. Please send zip for shipping.

29620 commercial address if it matters. Jay

spudz · 01-16-2011, 11:08 PM

Would you be interested in removing the material from the front seat and shipping it? If its in good shape that is. And put me next in line for the radio.
Posted via Mobile Device

HOTFUN · 01-16-2011, 11:28 PM

I'll take the radio if it gets to me. Thanks, Mark

SBTork · 01-17-2011, 01:00 AM

Quote:

Originally Posted by chevybuldr

I got the grill out and I cant find any broken spots. I am kinda nervous shipping somthing so big and fragile.

I need to know how much of the door panels do you want? Just the panels with nothing attached? Do you want the inserts? The brush panel inserts have broken tabs. The velour inserts are not very good. The panels are typical scratched. The front drivers is starting to fade on the the top but not chauky.

the rear cargo doors, how much do you want the top and bottoms? the bottoms are ok need a good cleaning. The tops are scratched and the passanger side one is cracked in one spot. The panels are go around the side were the 2 doors come together are broken and no good.

The speaker grills are very good shape. 20.00 for both.

I need a shipping address to figure shipping and let me know how much you want of the panels.

If you can get decent packing for the grille I will take my chances on it showing up ok. The front door panels still sound like something of interest to me. I can transfer my trim to these panels. The barn door, door panels, I am looking for the carpet lowers and the plastic upper trim panels. If they're cracked I will pass, but take some pics and we can go from there as mine are in really rough shape. I will take the speaker grilles. I will PM you a shipping address.

chevybuldr · 01-17-2011, 02:14 AM

Quote:

Originally Posted by SBTork

If you can get decent packing for the grille I will take my chances on it showing up ok. The front door panels still sound like something of interest to me. I can transfer my trim to these panels. The barn door, door panels, I am looking for the carpet lowers and the plastic upper trim panels. If they're cracked I will pass, but take some pics and we can go from there as mine are in really rough shape. I will take the speaker grilles. I will PM you a shipping address.

OK I will work on getting some pictures and let me see about a good shipping box.

chevybuldr · 01-17-2011, 02:16 AM

Quote:

Originally Posted by coater

How much for the temperature control unit? Would like to have the rear bumper,but sure shipping would be crazy! Zip 31763

20.00 for the controls. Rear bumper is bent. Let me get the controls out and see what box i can fit them in.

chevybuldr · 01-17-2011, 02:30 AM

Quote:

Originally Posted by spudz

Would you be interested in removing the material from the front seat and shipping it? If its in good shape that is. And put me next in line for the radio.
Posted via Mobile Device

Would Rather not "skin" the seat but if I dont sell it you are first. You are also next in line for the radio.

chevybuldr · 01-17-2011, 02:31 AM

Quote:

Originally Posted by HOTFUN

I'll take the radio if it gets to me. Thanks, Mark

Your third in-line for the radio

BigRed76 · 01-17-2011, 10:26 AM

Can you get a pic or two of the fuel filler neck from the fuel filler door? I am interested in it.

spudz · 01-17-2011, 10:30 AM

Quote:

Originally Posted by chevybuldr

Would Rather not "skin" the seat but if I dont sell it you are first. You are also next in line for the radio.

Ok that sounds good. Just let me know on the radio because I will take it.

jkade · 01-17-2011, 03:32 PM

How much for the fan shroud shipped to 35960?

chevybuldr · 01-17-2011, 11:59 PM

Quote:

Originally Posted by BigRed76

Can you get a pic or two of the fuel filler neck from the fuel filler door? I am interested in it.

Next time i am out there I will shoot some pics. You need from the body to the fuel door?

chevybuldr · 01-17-2011, 11:59 PM

Quote:

Originally Posted by jkade

How much for the fan shroud shipped to 35960?

The Fan shroud is broken.

BigRed76 · 01-18-2011, 12:21 AM

Quote:

Originally Posted by chevybuldr

Next time i am out there I will shoot some pics. You need from the body to the fuel door?

Yes. Would you also consider cutting out the whole fuel filler door assembly to ship?

Mr. 250r · 01-18-2011, 03:48 AM

how much for the rear left door and 4 cab doors

chevybuldr · 01-18-2011, 10:24 AM

Quote:

Originally Posted by Mr. 250r

how much for the rear left door and 4 cab doors

The front passanger door has a dent in the middle of it. I havent really looked at the others for any rust.

i think shipping would kill though.

01-16-2011, 01:05 PM	#1
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	88 chevy suburban 1/2ton 2wd Just got this for the motor/tranny 5.7/700r4 for my 70 GMC. Its TBI has cargo doors power everything. Its seen a tough life but in decent shape. Tell me what you are looking for and I will try to get it off as fast as possible. Tilt column nice and tight w/o wheel 125.00 + shipping Dash bezel un cut 35.00 + shipping Jack 25.00 + shipping Rear view mirror 15.00 + shipping Wiper Motor 10.00 + shipping Attached Images

01-16-2011, 01:23 PM	#2
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 88 chevy suburban 1/2ton 2wd Aaa Attached Images

01-16-2011, 02:03 PM	#3
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Re: 88 chevy suburban 1/2ton 2wd what are you asking for the pair of chrome outside mirrors and the radio?

01-16-2011, 03:21 PM	#4
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: 88 chevy suburban 1/2ton 2wd What about the wheel arch moldings, overflow tank and washer reservoir? Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

01-16-2011, 04:19 PM	#5
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: 88 chevy suburban 1/2ton 2wd how much for the grille, front and rear door panels, rear speaker grilles, and rear cargo door panels/plastic trim? If you're willing to ship, I am very serious. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

01-16-2011, 10:37 PM	#9
coater Registered User Join Date: Jan 2010 Location: Leesburg,Ga. Posts: 359	Re: 88 chevy suburban 1/2ton 2wd How much for the temperature control unit? Would like to have the rear bumper,but sure shipping would be crazy! Zip 31763

01-16-2011, 11:08 PM	#11
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: 88 chevy suburban 1/2ton 2wd Would you be interested in removing the material from the front seat and shipping it? If its in good shape that is. And put me next in line for the radio. Posted via Mobile Device __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

01-16-2011, 11:28 PM	#12
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 88 chevy suburban 1/2ton 2wd I'll take the radio if it gets to me. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

01-17-2011, 10:26 AM	#18
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: 88 chevy suburban 1/2ton 2wd Can you get a pic or two of the fuel filler neck from the fuel filler door? I am interested in it. __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

01-17-2011, 03:32 PM	#20
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: 88 chevy suburban 1/2ton 2wd How much for the fan shroud shipped to 35960?

01-18-2011, 03:48 AM	#24
Mr. 250r Registered User Join Date: Dec 2010 Location: freeburg, illinois Posts: 885	Re: 88 chevy suburban 1/2ton 2wd how much for the rear left door and 4 cab doors

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.