02-01-2011, 01:00 AM | #1 |
Registered User
Join Date: Aug 2010
Location: North Wales, PA
Posts: 82
|
Dash Light Issue
Hey 1985 Chevy C10, 2wd, 305 TH350, ne way
The light behind the right hand part of my fuel gauge/the ashtray light arent working, they have in the past and they would come on sometimes while I was driving, so I know both bulbs are good. Where is the wire that could make them not work, or fuse or something? Thankyou And if your wondering, yes I just made two threads, cause I hate listing like 8 problems in 1. -Adam |
02-01-2011, 01:46 AM | #2 |
In the Forgotten far North.
Join Date: Jul 2007
Location: Anchorage, Alaska
Posts: 2,627
|
Re: Dash Light Issue
The bulb is in a socket on the back side of the dash and makes contact with a printed circuit attached to the back of the cluster assembly.
The particular location that['s giving you problems has a plastic "FIBER OPTIC" lead that runs down to the ashtray area. You can remove the socket from the back of the cluster and tweak the contacts on it to get a better connection. Also take a pencil with a good eraser and carefully clean the contact area on the printed circuit to help ensure a good connection.
__________________
1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade |
02-01-2011, 09:32 AM | #3 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Dash Light Issue
i used a very fine sand paper
there are little bumps on the plastic to hold the socket to make the connection you may wana check the actual bulb base wires too (that they wrap around the base) i used a meter checking each bulb and in the socket and on the circut board when installed
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|