power steering hose question

[60apache]

what do I do about the power steering hose the engine is ls1 the steering box is 1980 c10.

[Clyde65]

Look at this, it will help you

http://www.classictrucks.com/tech/09.../photo_18.html

[60apache]

that wont work with car accessories

[68 c10 ls2]

Use the stock lines off your LS1 pump and the cut and reflare the lines with the ASE/ stock gear box fittings.

[Cheyenne Supr]

Mine were not stock hoses either. I had o-ring fittings on the box end and a flare fitting on the pump end. I never did figure out exactly what I had...none of the local auto parts suppliers could figure it out, and we searched through many hoses on their shelves trying to find a fit. I finally found a shop here locally that makes custom hydraulic hoses, mainly for tractors, and they made me a custom hose that was exactly what I needed.

[Big Port Jimmy 6]

Pull the relief valve out of the original pump on the truck it should be a flare fitting. Install it in the new pump Use a stock 80 model pressure hose. Jay

[60apache]

Originally Posted by Big Port Jimmy 6

Pull the relief valve out of the original pump on the truck it should be a flare fitting. Install it in the new pump Use a stock 80 model pressure hose. Jay

that would work great if I were using truck accessories! I have a camaro ps pump