rebuilding AD door hinges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BlueJeep · 02-23-2011, 11:13 PM

For those of you who've freshened up your door hinges on AD trucks, who did you get your pins through and what was the quality of the fit? Thanks!

smittster · 02-24-2011, 01:11 AM

I just bought a rebuilt kit from classic parts of america or brothers, they are probably identical. I had a shop put them on for me and it made a huge difference. The hinges are solid with no up and down movement.

pgf545 · 02-24-2011, 02:30 PM

I got a kit from Brothers I think. It was a pretty easy install, but I have access to a nice milling machine that I could really hold onto the hinges. The hardest part was getting the old pins out. I actually had to drill out the old pins because they had rusted solid in there. I have some pictures on my build thread if you want to see how I did it.

Bernie

OrrieG · 02-24-2011, 02:39 PM

over at Stovebolt MartinSR has a tech page on the install. It includes the easy way to extract the pins. My kit came with new bushings, as long as you drill the hole for bushing the right size the fit is tight. It is for AD trucks but TF are very similar.

http://www.stovebolt.com/techtips/do...ges/index.html

02-23-2011, 11:13 PM	#1
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	rebuilding AD door hinges For those of you who've freshened up your door hinges on AD trucks, who did you get your pins through and what was the quality of the fit? Thanks! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

02-24-2011, 01:11 AM	#2
smittster Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 96	Re: rebuilding AD door hinges I just bought a rebuilt kit from classic parts of america or brothers, they are probably identical. I had a shop put them on for me and it made a huge difference. The hinges are solid with no up and down movement.

02-24-2011, 02:30 PM	#3
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: rebuilding AD door hinges I got a kit from Brothers I think. It was a pretty easy install, but I have access to a nice milling machine that I could really hold onto the hinges. The hardest part was getting the old pins out. I actually had to drill out the old pins because they had rusted solid in there. I have some pictures on my build thread if you want to see how I did it. Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

02-24-2011, 02:39 PM	#4
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: rebuilding AD door hinges over at Stovebolt MartinSR has a tech page on the install. It includes the easy way to extract the pins. My kit came with new bushings, as long as you drill the hole for bushing the right size the fit is tight. It is for AD trucks but TF are very similar. http://www.stovebolt.com/techtips/do...ges/index.html __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project Last edited by OrrieG; 02-24-2011 at 02:40 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.