Inner fenders from LMC (aftermarket) fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JAG66 · 03-05-2011, 05:55 PM

Has anyone bolted in a new after market inner fender and did it line up good such as bolt holes and everything that attaches to it?
Just pulled the RF inner fender from my 86 SWB because of battery acid rotted an area. Trying to decide if I should just fiberglass repair my fender and remount since I know it will fit.

junkyardjohn · 03-05-2011, 07:13 PM

I USED A PAIR, & THEY WEREN'T TOO BAD. RIGHT AFTER I PUT THEM IN A MEMBER HERE PUT A PAIR OF NOS ONES UP FOR SALE, (I HAD A W.T.B. POST UP FOR A MONTH) SO I PULLED THEM OUT AFTER I PAID HIM BIG $ FOR THEM. MAN HE SCREWED ME AROUND FOR 2 WEEKS & WOULDN'T ANSWER ANY OF MY TELE. CALLS OR EMAILS UNTIL I GOT PAYPAL INVOLVED, & PUT A HOLD ON HIS PAYPAL ACCOUNT. SUDDENLY.. MAGICALLY.. HE REMEMBERED HOW TO P.M. ME. REAL NICE

SHIPPING WAS A KILLER. ANYWAY... I'VE GOT A SET HERE IN S/E KY IF YOU'RE GOING TO BE IN THIS AREA. I WON'T SHIP EM. $100 FOR THE PAIR PICKED UP. JOHN (I HOPE NO ONE CONSTRUES THIS AS BREAKING ANY RULES SINCE YOU ARE PINK) (DONTCHA HATE BEING PINK??) (I'LL KNOCK OFF $10 IF YOU DONATE $25 TO BECOME A SUBSCRIBING MEMBER..... IT'S WORTH IT.....HONEST) JOHN

JAG66 · 03-05-2011, 10:24 PM

Junkyard, If they fit, why take them out? Ready to place a large parts order and need to know how the fit is.

junkyardjohn · 03-06-2011, 09:09 AM

Quote:

Originally Posted by JAG66

Junkyard, If they fit, why take them out? Ready to place a large parts order and need to know how the fit is.

I TOOK EM OUT TO REPLACE THEM WITH N.O.S. INNERS. N.O.S. MEENS NEW OLD STOCK. & THERE NOT AVAILABLE.....ANYWHERE. THIS WAS FOR ONE OF MY OLD MILITARY CUCV TRUCKS, & IT JUST KICKED MY BUTT TO PUT CHINEEZE PARTS ON AN OLD MILITARY AMERICAN MADE WORKHORSE. PROBABLY DON'T MAKE GOOD SENCE TO SOME... BUT I'M KINDA FUNNY THAT WAY. IF YOU CAN GET GOOD ONES FOR $109 YOU'D BE CRAZY NOT TOO. I PAID ABOUT $165 FOR THESE BY THE TIME THEY GOT HERE. THEY'RE PAID FOR, & NOT EATING OR POOPING (TRYING TO BE POLITICALLY CORRECT HERE) (BEEN REPRIMANDED FOR NOT BEING B-4) & I'LL USE EM. WASN'T TRYING TO TALK YOU INTO ANYTHING... JUST TRYING TO HELP YOU OUT. BUT IN ANSWER TO YOUR ORIGINAL QUESTION..... YEP..... I LIKED THE LMC ONES JUST FINE. CAN'T SAY ABOUT ANY OF THE OTHER CHINEEZE OR TIWANEEZE ONES. NO PERSONAL EXPERIANCE WITH THEM. GOOD LUCK WITH EM.

JOHN

Mr79C10 · 03-06-2011, 07:43 AM

Quote:

Originally Posted by junkyardjohn

(I HOPE NO ONE CONSTRUES THIS AS BREAKING ANY RULES SINCE YOU ARE PINK) (DONTCHA HATE BEING PINK??) (I'LL KNOCK OFF $10 IF YOU DONATE $25 TO BECOME A SUBSCRIBING MEMBER..... IT'S WORTH IT.....HONEST) JOHN

Chlorin8ed · 03-05-2011, 10:57 PM

Has anyone tried parts (especially inner fenders) from "Browns of Two Rivers" out of Wisconsin? I went to my local body shop and this is where he said they could get them. I didn't think it was too bad, he quoated me $107 for both and shipped. Not sure if that is his cost or a little more for him, but I didn't think that was too bad.

LMC shipping was a killer

russgt · 03-06-2011, 10:27 AM

Quote:

Originally Posted by Chlorin8ed

Has anyone tried parts (especially inner fenders) from "Browns of Two Rivers" out of Wisconsin? I went to my local body shop and this is where he said they could get them. I didn't think it was too bad, he quoated me $107 for both and shipped. Not sure if that is his cost or a little more for him, but I didn't think that was too bad.

LMC shipping was a killer

I've dealt with Jensen camaro out of tipton, IA and have had good luck with the goodmark parts that they deal with

79gmcclassic · 03-05-2011, 11:15 PM

i live in green bay close to BROWNS and their sheetmetal is good quality i hear. but i dont have experience buying from them yet.

**old Rusty C10** · 03-05-2011, 11:50 PM

ive never used the ones from LMC knowingly but there is a vast disparity among the aftermarket inner fenders.... I bought a chinese set from a swap meet for one truck and they stank and a set i bought through one of our site vendors although not perfect with the holes fit in a heck of alot better

JAG66 · 03-06-2011, 04:47 AM

Who sells a RF inner fender that FITS?

SeanPaintsFlames · 03-06-2011, 10:19 AM

I bought a set of Goodmark inner fenders that were sold through Keystone, and they were okay. I did have to open up a couple of the holes a little bit and push on them to make some other holes reach, but they weren't that bad.

The Taiwanese fenders, on the other hand...

03-05-2011, 05:55 PM	#1
JAG66 Registered User Join Date: Feb 2011 Location: Goldsboro, NC Posts: 179	Inner fenders from LMC (aftermarket) fit? Has anyone bolted in a new after market inner fender and did it line up good such as bolt holes and everything that attaches to it? Just pulled the RF inner fender from my 86 SWB because of battery acid rotted an area. Trying to decide if I should just fiberglass repair my fender and remount since I know it will fit.

03-05-2011, 07:13 PM	#2
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: Inner fenders from LMC (aftermarket) fit? I USED A PAIR, & THEY WEREN'T TOO BAD. RIGHT AFTER I PUT THEM IN A MEMBER HERE PUT A PAIR OF NOS ONES UP FOR SALE, (I HAD A W.T.B. POST UP FOR A MONTH) SO I PULLED THEM OUT AFTER I PAID HIM BIG $ FOR THEM. MAN HE SCREWED ME AROUND FOR 2 WEEKS & WOULDN'T ANSWER ANY OF MY TELE. CALLS OR EMAILS UNTIL I GOT PAYPAL INVOLVED, & PUT A HOLD ON HIS PAYPAL ACCOUNT. SUDDENLY.. MAGICALLY.. HE REMEMBERED HOW TO P.M. ME. REAL NICE SHIPPING WAS A KILLER. ANYWAY... I'VE GOT A SET HERE IN S/E KY IF YOU'RE GOING TO BE IN THIS AREA. I WON'T SHIP EM. $100 FOR THE PAIR PICKED UP. JOHN (I HOPE NO ONE CONSTRUES THIS AS BREAKING ANY RULES SINCE YOU ARE PINK) (DONTCHA HATE BEING PINK??) (I'LL KNOCK OFF $10 IF YOU DONATE $25 TO BECOME A SUBSCRIBING MEMBER..... IT'S WORTH IT.....HONEST) JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 03-05-2011 at 07:17 PM.

03-05-2011, 10:24 PM	#3
JAG66 Registered User Join Date: Feb 2011 Location: Goldsboro, NC Posts: 179	Re: Inner fenders from LMC (aftermarket) fit? Junkyard, If they fit, why take them out? Ready to place a large parts order and need to know how the fit is.

03-05-2011, 10:57 PM	#6
Chlorin8ed Registered User Join Date: Feb 2011 Location: Iowa Posts: 20	Re: Inner fenders from LMC (aftermarket) fit? Has anyone tried parts (especially inner fenders) from "Browns of Two Rivers" out of Wisconsin? I went to my local body shop and this is where he said they could get them. I didn't think it was too bad, he quoated me $107 for both and shipped. Not sure if that is his cost or a little more for him, but I didn't think that was too bad. LMC shipping was a killer __________________ 1987 Chevy R10 2004 GMC Sierra 1980 Chevy Malibu

03-05-2011, 11:15 PM	#8
79gmcclassic Registered User Join Date: Jun 2010 Location: Green bay, Wisconsin Posts: 593	Re: Inner fenders from LMC (aftermarket) fit? i live in green bay close to BROWNS and their sheetmetal is good quality i hear. but i dont have experience buying from them yet. __________________ 1979 GMC Sierra Classic Freshly lowered 5 inches

03-05-2011, 11:50 PM	#9
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Inner fenders from LMC (aftermarket) fit? ive never used the ones from LMC knowingly but there is a vast disparity among the aftermarket inner fenders.... I bought a chinese set from a swap meet for one truck and they stank and a set i bought through one of our site vendors although not perfect with the holes fit in a heck of alot better __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-06-2011, 04:47 AM	#10
JAG66 Registered User Join Date: Feb 2011 Location: Goldsboro, NC Posts: 179	Re: Inner fenders from LMC (aftermarket) fit? Who sells a RF inner fender that FITS?

03-06-2011, 10:19 AM	#11
SeanPaintsFlames Registered User Join Date: Feb 2008 Location: Buford, Ga. Posts: 339	Re: Inner fenders from LMC (aftermarket) fit? I bought a set of Goodmark inner fenders that were sold through Keystone, and they were okay. I did have to open up a couple of the holes a little bit and push on them to make some other holes reach, but they weren't that bad. The Taiwanese fenders, on the other hand... __________________ My 68 cougar restomod build:HERE

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.