Harwood hood installed Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RICKSRAT · 03-07-2011, 05:40 PM

Well finally got the Harwood hood painted and installed. Hood is a 3" and fit was alot better fit and less work to get painted than 2 different previous fiberglass hoods I've had. Underside is finished as well.

ripdog28 · 03-07-2011, 05:46 PM

That looks good.

BossHogg69 · 03-07-2011, 06:17 PM

Harwood stuff is awesome, and yours looks GREAT! I had one on my '92 C1500 xcab and the fit and finish of their products is top notch.

regan wilson · 03-07-2011, 06:58 PM

That looks good man . They built the original mold of that hood from one of my high school buddies , dads truck . They test fitted it on mine and actually gave me one . Mine fit on all four corners but had a really big gap along the fenders so I traded it to a guy to fix my old hood . Anyhow it looks real good on your truck .

BossHogg69 · 03-07-2011, 07:09 PM

Any idea on weight savings for this piece vs a stock steel hood?

rattleon · 03-07-2011, 07:40 PM

Hood looks great, I just wish they sold a 4"+ version. Did you have to work it over much prior to paint?

68 C-10 KID · 03-09-2011, 12:19 AM

So sad for me they only make it for the 69 up.

turp mcspray · 03-12-2011, 09:53 PM

Does it fit as nice as it appears to in the pics?

RICKSRAT · 03-15-2011, 04:02 PM

Thanks guys . Looking forward to Car show in Galveston in a couple of weeks and then back to the track to see how it runs since I made a few changes to motor and had freshened up. Also went from a NOS pro fogger to a new 2 stage Pro flow nitrous system and new Dana60 with more gear since last trip to the track.Hope to go some low 9's this year.

Bosshog: Hood weighs 40# compared to the 68# Goodmark 2" cowl. Talked to Harwood and they said they will put Truck on their Website when I send them a picture

Turp: Hood fits real good along fenders and cowl. Front to grill looks ok but
fit is more due to grill fitting issue to passenger side aftermarket fender.

Wasted Income · 03-21-2011, 12:32 PM

Man that looks great! I want one.

RICKSRAT · 03-28-2011, 10:28 PM

Well took Truck to the first car show in about 5 years and got 2nd in Modified class. Now just a couple of finishing details to take to track and see how it runs.
Need opinions on how truck sits now. I think it has to much of a rake and front needs to come up some.Will be ordering new front springs and not sure if I should raise front or not. Whats your opinions?

BossHogg69 · 03-28-2011, 11:30 PM

My opinion is that your truck is bada$$!

If it were me, I would lower the back a touch before I raised the front, but depending on your rear suspension setup, that might be out of the question.
Posted via Mobile Device

**Captainfab** · 03-28-2011, 11:55 PM

I like it just the way it sits......

BIG KRIS · 03-30-2011, 02:12 AM

Leave it like it is and kick ass on the track and at the shows.

ripdog28 · 03-30-2011, 08:00 AM

Drop the rear 1 in. I love when those fat tires are tucked. I have a rake about the same as yours. Ill be dropping the rear and i cant roll a tennis ball under the front.

BIG KRIS · 03-30-2011, 08:10 AM

Any pics of yours?
Posted via Mobile Device

BIG KRIS · 03-30-2011, 09:11 AM

Quote:

Originally Posted by RICKSRAT

Well took Truck to the first car show in about 5 years and got 2nd in Modified class. Now just a couple of finishing details to take to track and see how it runs.
Need opinions on how truck sits now. I think it has to much of a rake and front needs to come up some.Will be ordering new front springs and not sure if I should raise front or not. Whats your opinions?

What size wheels and tires are you running.
Posted via Mobile Device

RICKSRAT · 03-31-2011, 07:27 AM

Kris 15 x 5 w/28 x 4.5 and 15 x 14 w/31 x 14 .
Rear is about as low as I can go and this is with a c notch. So I am looking at raising the front some to take some of the rake out. Current front springs are a 1" drop and are 12" long. I have'nt found a spring less than 16" for racing so it will raise the front.Hopefully not to much that I have to raise the rear to level back off.

*stich626* · 03-31-2011, 09:36 AM

looks great...
for those that can't get one. (year not made)
goodmark makes a 2.5" and a 5" steel cowl scoop
summit racing sell it, and would any vendor that stocks goodmark near you..
I just bought the 5" for my monty SS..
goodmark makes a hood for my car but the hood is 580.oo plus shipping(truck freight=not cheap)
scoop was 149.00 shipped ups
hope that helps

1Bad62Pro/Street · 03-31-2011, 11:21 AM

Very nice.
Whole a lot better made than mine!
Nothing like in the photos on the website!
http://www.up22.com/chevytruck.htm#1...y Trucks & GMC

03-07-2011, 05:46 PM	#2
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: Harwood hood installed Pics That looks good. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

03-07-2011, 06:17 PM	#3
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Harwood hood installed Pics Harwood stuff is awesome, and yours looks GREAT! I had one on my '92 C1500 xcab and the fit and finish of their products is top notch. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-07-2011, 06:58 PM	#4
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Harwood hood installed Pics That looks good man . They built the original mold of that hood from one of my high school buddies , dads truck . They test fitted it on mine and actually gave me one . Mine fit on all four corners but had a really big gap along the fenders so I traded it to a guy to fix my old hood . Anyhow it looks real good on your truck . __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

03-07-2011, 07:09 PM	#5
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Harwood hood installed Pics Any idea on weight savings for this piece vs a stock steel hood? __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-07-2011, 07:40 PM	#6
rattleon Registered User Join Date: Oct 2009 Location: Idaho Posts: 44	Re: Harwood hood installed Pics Hood looks great, I just wish they sold a 4"+ version. Did you have to work it over much prior to paint? __________________ 1970 c-10 short/step box morphing into street/strip 1967 RS/SS convertible Camaro 1932 Henry Ford steel 5 window coupe highboy hotrod 1931 full fendered model A sedan AV8 traditional hotrod. 1934 Ford 5 window coupe and a (pile-of-parts) 1929 Model A coupe, plus our "normal" people vehicles.

03-07-2011, 05:40 PM	#1
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Harwood hood installed Pics Well finally got the Harwood hood painted and installed. Hood is a 3" and fit was alot better fit and less work to get painted than 2 different previous fiberglass hoods I've had. Underside is finished as well. Attached Images __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32 Last edited by RICKSRAT; 03-07-2011 at 07:42 PM. Reason: add pics

03-09-2011, 12:19 AM	#7
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: Harwood hood installed Pics So sad for me they only make it for the 69 up. __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.

03-12-2011, 09:53 PM	#8
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Harwood hood installed Pics Does it fit as nice as it appears to in the pics? __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

03-15-2011, 04:02 PM	#9
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Harwood hood installed Pics Thanks guys . Looking forward to Car show in Galveston in a couple of weeks and then back to the track to see how it runs since I made a few changes to motor and had freshened up. Also went from a NOS pro fogger to a new 2 stage Pro flow nitrous system and new Dana60 with more gear since last trip to the track.Hope to go some low 9's this year. Bosshog: Hood weighs 40# compared to the 68# Goodmark 2" cowl. Talked to Harwood and they said they will put Truck on their Website when I send them a picture Turp: Hood fits real good along fenders and cowl. Front to grill looks ok but fit is more due to grill fitting issue to passenger side aftermarket fender. __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32 Last edited by RICKSRAT; 03-15-2011 at 04:10 PM.

03-21-2011, 12:32 PM	#10
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: Harwood hood installed Pics Man that looks great! I want one. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

03-28-2011, 10:28 PM	#11
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Harwood hood installed Pics Well took Truck to the first car show in about 5 years and got 2nd in Modified class. Now just a couple of finishing details to take to track and see how it runs. Need opinions on how truck sits now. I think it has to much of a rake and front needs to come up some.Will be ordering new front springs and not sure if I should raise front or not. Whats your opinions? Attached Images __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32

03-28-2011, 11:30 PM	#12
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Harwood hood installed Pics My opinion is that your truck is bada$$! If it were me, I would lower the back a touch before I raised the front, but depending on your rear suspension setup, that might be out of the question. Posted via Mobile Device __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-28-2011, 11:55 PM	#13
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Harwood hood installed Pics I like it just the way it sits...... __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-30-2011, 02:12 AM	#14
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Harwood hood installed Pics Leave it like it is and kick ass on the track and at the shows. __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

03-30-2011, 08:00 AM	#15
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: Harwood hood installed Pics Drop the rear 1 in. I love when those fat tires are tucked. I have a rake about the same as yours. Ill be dropping the rear and i cant roll a tennis ball under the front. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.



Register or Log In To remove these advertisements.

03-30-2011, 08:10 AM	#16
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Harwood hood installed Pics Any pics of yours? Posted via Mobile Device __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

03-31-2011, 07:27 AM	#18
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Harwood hood installed Pics Kris 15 x 5 w/28 x 4.5 and 15 x 14 w/31 x 14 . Rear is about as low as I can go and this is with a c notch. So I am looking at raising the front some to take some of the rake out. Current front springs are a 1" drop and are 12" long. I have'nt found a spring less than 16" for racing so it will raise the front.Hopefully not to much that I have to raise the rear to level back off. __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32

03-31-2011, 09:36 AM	#19
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: Harwood hood installed Pics looks great... for those that can't get one. (year not made) goodmark makes a 2.5" and a 5" steel cowl scoop summit racing sell it, and would any vendor that stocks goodmark near you.. I just bought the 5" for my monty SS.. goodmark makes a hood for my car but the hood is 580.oo plus shipping(truck freight=not cheap) scoop was 149.00 shipped ups hope that helps

03-31-2011, 11:21 AM	#20
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Harwood hood installed Pics Very nice. Whole a lot better made than mine! Nothing like in the photos on the website! http://www.up22.com/chevytruck.htm#1...y Trucks & GMC __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.