GA Square body bumper guards wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72freak · 03-24-2011, 06:44 AM

I need 2 sets of clean bumper guards. they dont have to be perfect but prefer no rust. Thanks

Let me know what you have.

**72 LONGHORN** · 03-29-2011, 08:15 PM

72freak, I have a set of bumper guards that should clean up ok. I'll try to post some pics for you later tonight.

BustedTruck · 03-29-2011, 10:07 PM

I may have a set also. I'll let you know what condition they are tommorow.

**72 LONGHORN** · 03-29-2011, 11:03 PM

72freak, here are the pics of the pair I have $33 shipped.

72freak · 03-30-2011, 05:33 AM

I will take them both pending pics and fitment.....I didnt know this but someone said there was a difference from 74-80 and 81-87....can anyone confirm?

csa daddy · 03-30-2011, 07:43 AM

i should have a set of each i will get pics in a little while a post them up

*87 chevy silverado* · 03-30-2011, 05:38 PM

the ones in the pics are 81-87

BustedTruck · 03-30-2011, 06:02 PM

Here ya go. Just let me know. $15 plus shipping unless you wanna drive over & pick em up. They aren't rusted out, but have some surface rust on the back side.

Big Port Jimmy 6 · 03-30-2011, 09:59 PM

The second set appear to be 73-80. Jay

BigRed76 · 03-30-2011, 10:45 PM

73-80 and 81-87 bumper guards were different because the 73-80 and 81-87 bumpers were different. The only difference between the two is the shape of the side that faces the bumper.

72freak · 03-31-2011, 04:37 PM

Quote:

Originally Posted by Big Port Jimmy 6

The second set appear to be 73-80. Jay

I agree with the above.....BustedTruck...what year truck is that?

BustedTruck · 03-31-2011, 04:45 PM

1976
Posted via Mobile Device

72freak · 04-02-2011, 04:46 PM

Quote:

Originally Posted by BustedTruck

1976
Posted via Mobile Device

Thanks....I need 81+

Walts_restoration · 04-02-2011, 04:57 PM

dont forget some of the 89-91s had a rubber pad on the bumper, so they wont work.

Walts_restoration · 04-02-2011, 04:58 PM

thats 89-91 square body, as is crew cab suburban and c+c and blazer.

03-24-2011, 06:44 AM	#1
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Square body bumper guards wanted I need 2 sets of clean bumper guards. they dont have to be perfect but prefer no rust. Thanks Let me know what you have. __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-29-2011, 08:15 PM	#2
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Square body bumper guards wanted 72freak, I have a set of bumper guards that should clean up ok. I'll try to post some pics for you later tonight.

03-29-2011, 10:07 PM	#3
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Square body bumper guards wanted I may have a set also. I'll let you know what condition they are tommorow.

03-29-2011, 11:03 PM	#4
72 LONGHORN Senior Member Join Date: Sep 2010 Location: Newark,Il Posts: 615	Re: Square body bumper guards wanted 72freak, here are the pics of the pair I have $33 shipped. Attached Images

03-30-2011, 05:33 AM	#5
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Square body bumper guards wanted I will take them both pending pics and fitment.....I didnt know this but someone said there was a difference from 74-80 and 81-87....can anyone confirm? __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-30-2011, 07:43 AM	#6
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,205	Re: Square body bumper guards wanted i should have a set of each i will get pics in a little while a post them up

03-30-2011, 05:38 PM	#7
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Square body bumper guards wanted the ones in the pics are 81-87

03-30-2011, 06:02 PM	#8
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Square body bumper guards wanted Here ya go. Just let me know. $15 plus shipping unless you wanna drive over & pick em up. They aren't rusted out, but have some surface rust on the back side. Attached Images

03-30-2011, 09:59 PM	#9
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: Square body bumper guards wanted The second set appear to be 73-80. Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

03-30-2011, 10:45 PM	#10
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Square body bumper guards wanted 73-80 and 81-87 bumper guards were different because the 73-80 and 81-87 bumpers were different. The only difference between the two is the shape of the side that faces the bumper. __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB Last edited by BigRed76; 03-30-2011 at 10:46 PM.

03-31-2011, 04:45 PM	#12
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Square body bumper guards wanted 1976 Posted via Mobile Device

04-02-2011, 04:57 PM	#14
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Square body bumper guards wanted dont forget some of the 89-91s had a rubber pad on the bumper, so they wont work. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

04-02-2011, 04:58 PM	#15
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Square body bumper guards wanted thats 89-91 square body, as is crew cab suburban and c+c and blazer. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.