Temp sender connection - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61_FL_Apache · 04-03-2011, 09:30 AM

I want to get my factory water temp guage working again. I can find replacement sending units, but the slide on connector, where can I find that?

I will need to run a new wire back to the guage also. Is this just a single wire from guage to sender?

**scotts62** · 04-03-2011, 04:05 PM

I have went cheesy before and just used the flat female connector and works just fine.

**Captainfab** · 04-03-2011, 04:08 PM

Yes there is just one wire going to the gauge. This is actually the ground wire for the temp gauge.

Here is one source for the connector

https://www.ronfrancis.com/prodinfo.asp?number=TS%2D10

I'm sure there are other sources, that is just the first that came to mind. Maybe try some of the other wiring suppliers too.

**scotts62** · 04-03-2011, 04:08 PM

Pricey little boogar..

61_FL_Apache · 04-03-2011, 06:24 PM

thanks for the info guys!!

04-03-2011, 09:30 AM	#1
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Temp sender connection I want to get my factory water temp guage working again. I can find replacement sending units, but the slide on connector, where can I find that? I will need to run a new wire back to the guage also. Is this just a single wire from guage to sender? __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

04-03-2011, 04:05 PM	#2
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Temp sender connection I have went cheesy before and just used the flat female connector and works just fine. __________________ Scott 93 crew cab build Project 62

04-03-2011, 04:08 PM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Temp sender connection Yes there is just one wire going to the gauge. This is actually the ground wire for the temp gauge. Here is one source for the connector https://www.ronfrancis.com/prodinfo.asp?number=TS%2D10 I'm sure there are other sources, that is just the first that came to mind. Maybe try some of the other wiring suppliers too. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-03-2011, 04:08 PM	#4
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Temp sender connection Pricey little boogar.. __________________ Scott 93 crew cab build Project 62

04-03-2011, 06:24 PM	#5
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Temp sender connection thanks for the info guys!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.