Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-17-2001, 12:23 PM | #1 |
Registered User
Join Date: Jun 2001
Location: KINGWOOD TEXAS
Posts: 515
|
Heavy Half vs 3/4ton Balljoints
What are the difference in size on Heavy Half and 3/4 ton ball joints? or are heavy half's the same size as regular half ton balljoints?
__________________
Member of the "Old Farts Club" |
07-17-2001, 01:51 PM | #2 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
heavy half is not a 3/4 ton, a heavy half is basically a 1/2 with 3/4 springs, the a arms and spindles are stil 1/2.
3/4 bal joints use a differnet arm than a 1/2, the joints will not swap. |
07-17-2001, 11:48 PM | #3 |
Registered User
Join Date: Jun 2001
Location: KINGWOOD TEXAS
Posts: 515
|
So, are you saying the Heavy half uses the same balljoint as an ordinary 1/2 ton?
Weren't there some big block suburbans that used different balljoints too?
__________________
Member of the "Old Farts Club" |
07-19-2001, 12:09 AM | #4 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
half ton is half ton, period, its not a 3/4 ton til it has the 3/4 ton a arms, and 8 bolt spindles.
[This message has been edited by Fast68Chevy (edited 07-19-2001).] |
07-19-2001, 10:25 PM | #5 |
Registered User
Join Date: Jun 2001
Location: KINGWOOD TEXAS
Posts: 515
|
Here we go again. Does anybody besides 68 have any knowledgable experience with the original question of this post.
__________________
Member of the "Old Farts Club" |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|