Exhaust tip through fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66farmer · 07-15-2011, 11:21 AM

I have a 66 step side I want the exhaust tip to exit through the rear fenders I'm looking to do a very clean job maybe a trim ring around the hole. So I'm asking if anyone has any ideas on tips, trim rings or anything that would help. I have not seen any step side trucks done this way. The picture shows where I would like it to exit.

(I need some pictures)
Thanks

BR3W CITY · 07-15-2011, 11:56 AM

I'm not through the fender, instead through the step

If you want to cut a good hole, I'd recommend getting a threaded hole punch from harbor freight or similar. It shears the metal almost perfectly and they come in a variety of sizes. Plus it doesn't heat up the metal, or warp since its supported. They are pretty inexpensive as well. Import places sell stick on trim rings, but they are pretty ugly.

vin63 · 07-15-2011, 11:58 AM

Here is a thread: http://67-72chevytrucks.com/vboard/s...d.php?t=377873

I'm not a big fan of the exhaust through a panel for a street car/hot rod. Unless you install a wide flange for the opening, you run the risk of damaging your paint.

61_FL_Apache · 07-15-2011, 12:04 PM

I like that style.

I had this on my 65.

61_FL_Apache · 07-15-2011, 12:05 PM

Quote:

Originally Posted by BR3W CITY

I'm not through the fender, instead through the step

If you want to cut a good hole, I'd recommend getting a threaded hole punch from harbor freight or similar. It shears the metal almost perfectly and they come in a variety of sizes. Plus it doesn't heat up the metal, or warp since its supported. They are pretty inexpensive as well. Import places sell stick on trim rings, but they are pretty ugly.

Do you have this on both sides?

1Bad62Pro/Street · 07-15-2011, 03:32 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=402277

Rear Fender Exhaust route:

http://www.completecustomsinc.com/cu...p-side-pickup/

1Bad62Pro/Street · 07-15-2011, 03:46 PM

Stacey Davids GearZ or Trucks had an episode on this.
It was sweet looking.

66farmer · 07-15-2011, 07:27 PM

Mr City That exit point would be to close to the cab for me

Vin 63
Thanks for the link

Mr Apacke
I think I will keep that look for my tractor

Mr Street
Thanks for the picture. I want a more finished look

BR3W CITY · 07-16-2011, 02:45 PM

Quote:

Originally Posted by 61_FL_Apache

Do you have this on both sides?

ya. My exhaust runs out side the frame, then kicks up a bit to exit out of the step area on both sides.

*abigaillozano* · 08-05-2011, 09:40 PM

Quote:

Originally Posted by BR3W CITY

Pardon my ignorance, but why did you put this through the step? Is it due to the nature of the undercarriage that you cannot pass this through the fender? Wouldn't it be harder to go up and down from your truck? The tips look nice though, are they stainless exhaust tips?

Slow Build · 08-05-2011, 11:21 PM

I like the idea of going out the rear of the fender like you are planning. I think it would be more quiet in the cab and the exhaust won't dirty up your wheels.

But here is another option for the step exhaust exit that I thought looked pretty cool (but I wouldn't want to be barefoot on the step).

1Bad62Pro/Street · 06-22-2012, 06:47 PM

An idea....
Inserted in rear fender or above step plate.
2004 Mustang GT-R Concept Exhaust Tip shown below.

From the web.

Stacey David did this on a truck when he was on Trucks, but I can not find any pictures or videos of this.
Posted via Mobile Device
Posted via Mobile Device

63burban4x4 · 06-22-2012, 07:26 PM

Corvette trim rings?

1Bad62Pro/Street · 06-22-2012, 08:41 PM

There is a company that sells through-the body exhaust tips. These certain type through the body exhaust tips are only available from Stylin' Trucks. Perfect for roll pans or straight through fender or your bed.
The through-the-body exhaust tips require a little cutting to install, but the results are worth it according to them.
http://www.stylintrucks.com/articles...hevytahoe.aspx

http://www.stylintrucks.com/articles...hausttips.aspx

Also:
http://67-72chevytrucks.com/vboard/s...d.php?t=207137

Posted via Mobile Device

198plus · 06-22-2012, 11:10 PM

Quote:

Originally Posted by 1Bad62Pro/Street

There is a company that sells through-the body exhaust tips. These certain type through the body exhaust tips are only available from Stylin' Trucks. Perfect for roll pans or straight through fender or your bed.
The through-the-body exhaust tips require a little cutting to install, but the results are worth it according to them.
http://www.stylintrucks.com/articles...hevytahoe.aspx

http://www.stylintrucks.com/articles...hausttips.aspx

Also:
http://67-72chevytrucks.com/vboard/s...d.php?t=207137

Posted via Mobile Device

I called them a year ago and was told, these tips are no longer available.

1Bad62Pro/Street · 06-22-2012, 11:15 PM

Quote:

Originally Posted by 198plus

I called them a year ago and was told, these tips are no longer available.

Dang.... I guess they didn't sell enough. They are kinda cool.

198plus · 06-22-2012, 11:30 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Dang.... I guess they didn't sell enough. They are kinda cool.

I like them, they look killer coming out of bed in front side of tire.........

1enick72 · 06-30-2012, 02:17 PM

Here is an option that might work on the step. This is a 53 but similar.

FreakyMalo · 06-30-2012, 08:48 PM

If they were big enough, '56 Buick portholes would finish it off nicely. You might be able to make something that looks similar out of tubing that's larger than your exhaust tip. Sort of like a frenched antenna?

Reverse light trim rings would work if you were going straight out the back. I did that on my '60 Olds when I ran the exhaust through the bumper.

63burban4x4 · 06-30-2012, 09:16 PM

here's the corvette ones

Mechanic77 · 07-01-2012, 12:05 AM

Quote:

Originally Posted by 1Bad62Pro/Street

There is a company that sells through-the body exhaust tips. These certain type through the body exhaust tips are only available from Stylin' Trucks. Perfect for roll pans or straight through fender or your bed.
The through-the-body exhaust tips require a little cutting to install, but the results are worth it according to them.
http://www.stylintrucks.com/articles...hevytahoe.aspx

http://www.stylintrucks.com/articles...hausttips.aspx

Also:
http://67-72chevytrucks.com/vboard/s...d.php?t=207137

Posted via Mobile Device

You might still be able to get something similar.....just look for boat exhaust tips, just be prepared.....they are crazy expensive

Check these out....
http://www.corsaperf.com/media/pdf/S...xit%20Tips.pdf

198plus · 07-01-2012, 12:16 AM

Quote:

Originally Posted by Mechanic77

You might still be able to get something similar.....just look for boat exhaust tips, just be prepared.....they are crazy expensive

Check these out....
http://www.corsaperf.com/media/pdf/S...xit%20Tips.pdf

Yea you can buy them tru Donzi, I think they where like way way way up there...........

1Bad62Pro/Street · 08-18-2012, 04:46 AM

The Hero Box Truck [S4 Ep.7-2} - YouTube

The Hero Box Truck/ Tool Tech [S4 Ep.7-3} -...

1Bad62Pro/Street · 10-26-2012, 07:43 PM

I always liked the front exhaust fender exit look. Especially with the SS Header Fender Exit Trim Rings!.
You could shoe horn a muffler in there some where

FENDER EXIT HEADERS PIC PLEASE
http://www.yellowbullet.com/forum/sh....php?p=7627043

Quarter-Max Exhaust Flanges - YouTube

East Coast Door Warz Pro Mods, Outlaw 10.5, Outlaw Drag Radial, - YouTube

1963c-10 · 10-26-2012, 08:10 PM

very nice........drooling
Posted via Mobile Device

07-15-2011, 11:21 AM	#1
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Exhaust tip through fender I have a 66 step side I want the exhaust tip to exit through the rear fenders I'm looking to do a very clean job maybe a trim ring around the hole. So I'm asking if anyone has any ideas on tips, trim rings or anything that would help. I have not seen any step side trucks done this way. The picture shows where I would like it to exit. (I need some pictures) Thanks Attached Images

07-15-2011, 11:56 AM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Exhaust tip through fender I'm not through the fender, instead through the step If you want to cut a good hole, I'd recommend getting a threaded hole punch from harbor freight or similar. It shears the metal almost perfectly and they come in a variety of sizes. Plus it doesn't heat up the metal, or warp since its supported. They are pretty inexpensive as well. Import places sell stick on trim rings, but they are pretty ugly. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-15-2011, 11:58 AM	#3
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Exhaust tip through fender Here is a thread: http://67-72chevytrucks.com/vboard/s...d.php?t=377873 I'm not a big fan of the exhaust through a panel for a street car/hot rod. Unless you install a wide flange for the opening, you run the risk of damaging your paint. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

07-15-2011, 12:04 PM	#4
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Exhaust tip through fender I like that style. I had this on my 65. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

07-15-2011, 03:32 PM	#6
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Exhaust tip through fender http://67-72chevytrucks.com/vboard/s...d.php?t=402277 Rear Fender Exhaust route: http://www.completecustomsinc.com/cu...p-side-pickup/ __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

07-15-2011, 03:46 PM	#7
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Exhaust tip through fender Stacey Davids GearZ or Trucks had an episode on this. It was sweet looking. __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

07-15-2011, 07:27 PM	#8
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: Exhaust tip through fender Mr City That exit point would be to close to the cab for me Vin 63 Thanks for the link Mr Apacke I think I will keep that look for my tractor Mr Street Thanks for the picture. I want a more finished look Last edited by 66farmer; 07-15-2011 at 07:38 PM.

08-05-2011, 11:21 PM	#11
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: Exhaust tip through fender I like the idea of going out the rear of the fender like you are planning. I think it would be more quiet in the cab and the exhaust won't dirty up your wheels. But here is another option for the step exhaust exit that I thought looked pretty cool (but I wouldn't want to be barefoot on the step). Attached Images __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

06-22-2012, 06:47 PM	#12
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Exhaust tip through fender An idea.... Inserted in rear fender or above step plate. 2004 Mustang GT-R Concept Exhaust Tip shown below. From the web. Stacey David did this on a truck when he was on Trucks, but I can not find any pictures or videos of this. Posted via Mobile Device Posted via Mobile Device __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 06-22-2012 at 08:43 PM.

06-22-2012, 07:26 PM	#13
63burban4x4 Registered User Join Date: Mar 2012 Location: US Posts: 446	Re: Exhaust tip through fender Corvette trim rings?

06-22-2012, 08:41 PM	#14
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Exhaust tip through fender There is a company that sells through-the body exhaust tips. These certain type through the body exhaust tips are only available from Stylin' Trucks. Perfect for roll pans or straight through fender or your bed. The through-the-body exhaust tips require a little cutting to install, but the results are worth it according to them. http://www.stylintrucks.com/articles...hevytahoe.aspx http://www.stylintrucks.com/articles...hausttips.aspx Also: http://67-72chevytrucks.com/vboard/s...d.php?t=207137 Posted via Mobile Device __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 06-22-2012 at 08:50 PM.

06-30-2012, 02:17 PM	#18
1enick72 Registered User Join Date: Jun 2010 Location: Jackson, ME Posts: 287	Re: Exhaust tip through fender Here is an option that might work on the step. This is a 53 but similar. __________________ 65 short step edited by staff

06-30-2012, 08:48 PM	#19
FreakyMalo Registered User Join Date: Jun 2010 Location: Brown Sky, CA Posts: 125	Re: Exhaust tip through fender If they were big enough, '56 Buick portholes would finish it off nicely. You might be able to make something that looks similar out of tubing that's larger than your exhaust tip. Sort of like a frenched antenna? Reverse light trim rings would work if you were going straight out the back. I did that on my '60 Olds when I ran the exhaust through the bumper. __________________ 66 Carryall my photos

06-30-2012, 09:16 PM	#20
63burban4x4 Registered User Join Date: Mar 2012 Location: US Posts: 446	Re: Exhaust tip through fender here's the corvette ones Attached Images

10-26-2012, 08:10 PM	#25
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Exhaust tip through fender very nice........drooling Posted via Mobile Device __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.