|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-29-2011, 08:09 PM
|
#1 |
|
Registered User
Join Date: Aug 2011
Location: P.E.I Canada eh
Posts: 158
|
droppin a c1500 cheep!
ok so i dont wanna buy a kit or any spend any money... was thinkin in the rear take out the overload spring for sure and maybe the next one up to
cost... -center bolts 5 bucks up front was thinkin bout takin one ring off the bottom of the front springs ... cost... $0 gotta love that number anyone done anythin like this befor ... im aiming for a 3/2 drop ... buy i really wont know till i get into it ... any advise?... and whats this gonna do to my alignment angles .. am i gonna right off some ball joints doin this? |
|
|
|
08-29-2011, 08:57 PM
|
#2 |
|
Happy to be here
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: droppin a c1500 cheep!
The overload in the rear is less than an inch thick. Even if you pull another leaf I'm not sure your going to get a full 2" drop. I would consider a shackle instead.
Up front you can take a full coil off, but its closer to a 2" drop than anything. I did one that way, but prefer to go with 1/2 a coil and drop spindles. BTW- What size tires are you running. If you go one full coil in front, tall tires are going to rub.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
|
08-29-2011, 10:25 PM
|
#3 |
|
Registered User
Join Date: Aug 2011
Location: P.E.I Canada eh
Posts: 158
|
Re: droppin a c1500 cheep!
31/ 10.50's... big
|
|
|
|
|
08-29-2011, 11:03 PM
|
#4 |
|
Registered User
Join Date: Aug 2011
Location: P.E.I Canada eh
Posts: 158
|
Re: droppin a c1500 cheep!
i could prob make a set of shackles for the rear ... what can i get at napa fer a bushing for it? any ideas? ... im still gonna ditch the overload i never haul anythin anyway... i want a set of drop spindles but there just not in the budget... last draft 5 bucks ...this draft hoping is under 20 ... tires i can deal with i still got a set of 235/75/15s ... but what do guys do... when they run them big 20s ...do i gotta roll my fender lip in?
|
|
|
|
|
08-29-2011, 11:08 PM
|
#5 |
|
Registered User
Join Date: Aug 2011
Location: P.E.I Canada eh
Posts: 158
|
Re: droppin a c1500 cheep!
kinda hoping my shocks aint gonna bottom out...whats the limit for drop?
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
