Removing the dash

[Chvyman1975]

Hello, does anyone know how hard it is to remove the dash from a 62?

[LostMy65]

Originally Posted by Chvyman1975

Hello, does anyone know how hard it is to remove the dash from a 62?

I'm pretty sure I was just reading a thread asking that very question for a 64-66 generation dash.
They drill out the spotwelds across the lower lip of the windshield hole and remove the two or three bolts attached to the cab at either end of the dash.

It didn't sound too difficult.

I'll be doing it on a 64-66 dash in the coming weeks.
Posted via Mobile Device

[markeb01]

Post #7 on the following thread shows a photo of the spotwelds:

http://67-72chevytrucks.com/vboard/s...=removing+dash

[Woogeroo]

30 something spot welds if I recall.

-W

[Chvyman1975]

Originally Posted by markeb01

Post #7 on the following thread shows a photo of the spotwelds:

http://67-72chevytrucks.com/vboard/s...=removing+dash

thanks....this should be fairly easy considering the windshield is already out and the bolts are already out as well...

[MailManX2]

There are also 3 or 4 spotwelds at the ends of the dash under the A pillar panel (or whatever it's called).

[Chvyman1975]

Originally Posted by MailManX2

There are also 3 or 4 spotwelds at the ends of the dash under the A pillar panel (or whatever it's called).

sounds like picking up one of the two other cabs that I found would be easier....lol