|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-18-2011, 08:38 PM
|
#1 |
|
Registered User
Join Date: Sep 2010
Location: Saskatoon, SK
Posts: 244
|
Need some help on a bolt size
Wondering what the measurements are on a np205 for the bolt that bolts the shifter to the t-case. Much thanks.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=429098 |
|
|
|
09-19-2011, 09:35 AM
|
#2 |
|
Active Member
 Join Date: Dec 2004
Location: Tucson, AZ
Posts: 233
|
Re: Need some help on a bolt size
Three different ones. 7/16 or 1/2 or 9/16 . From my experience.......Rick
|
|
|
|
|
09-20-2011, 12:12 AM
|
#3 |
|
Registered User
Join Date: Sep 2010
Location: Saskatoon, SK
Posts: 244
|
Re: Need some help on a bolt size
How long about? If i remember right, if its too long it jams up the shifter.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=429098 |
|
|
|
|
09-20-2011, 07:48 PM
|
#4 |
|
Active Member
Join Date: Dec 2004
Location: Tucson, AZ
Posts: 233
|
Re: Need some help on a bolt size
There is a shoulder on the bolt I believe that keeps it from being tightened to far. Unless there is an extra washer on the shifter side. Early ones had a bolt with a spacer on shifter side that fit over bolt instead could get tight if spacer was to short....Rick
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
