|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-11-2011, 09:43 PM
|
#1 |
|
Registered User
 Join Date: Jan 2008
Location: Spokane WA
Posts: 254
|
Heater fan/motor question
Just wondering if anyone has a trick to remove the squire off the motor itself without destroying it
 I just cannot seem to figure out how to get it off without screwing it all up.. Thanks guys
|
|
|
|
10-12-2011, 01:15 AM
|
#2 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Heater fan/motor question
Are you talking about the squirel cage Reid? If so they can be a pita as they are usually rusted. What I do is soak them with some penetrating oil for a bit. Then somehow support the squirel cage independent from the motor, and tap on the motor shaft firmly. Hopefully it will break loose. Another way is if you have access to an oxy/acetylene torch, heat up the stem of the squirl cage quickly to cherry red. Most of the time that will expand the stem away from the shaft.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
