Bedliner on door panels... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MYNAMEISMUD · 01-15-2012, 08:58 PM

Mine looked like garbage, so I sprayed them with bedliner. The truck is about the get rebuilt , but 'til then this looks pretty good for $9. Pretty easy, figured I'd share.........

J Knight · 01-15-2012, 09:08 PM

It looks like it came out like black dye. Did it leave or add any texture?

MYNAMEISMUD · 01-15-2012, 09:14 PM

It does add a slight texture. Kind of like a grip-taped skateboard, with paint on it. Really, perfect for the door panels.

str8axle55 · 01-15-2012, 09:30 PM

Looks good, I like it.

Restrorob · 01-15-2012, 09:56 PM

That turned out purdy good !

What kind of prep did you do before spray'n ?

Pop's C-10 · 01-15-2012, 10:10 PM

nice work

JRANGER · 01-15-2012, 11:07 PM

Damn now to decide between this or Krylon....Nice though, I like it it a lot

MYNAMEISMUD · 01-15-2012, 11:11 PM

Quote:

Originally Posted by Restrorob

That turned out purdy good !

What kind of prep did you do before spray'n ?

I wiped it with Acetone, then hit it with Scotchbrite....then Acetone again. The first cleaning with Acetone is so you don't grind the crud in with the Scothbrite.

Texasupton1 · 01-15-2012, 11:19 PM

Now why couldnt you do the same thing with a dash pad? Trim up the cracks, fill them in with some sort of plastic body filler or such, then spray with bed liner. Couldnt you then use a something like Plastikote with color to go over the bed liner?

motornut · 01-15-2012, 11:31 PM

Quote:

Originally Posted by MYNAMEISMUD

Mine looked like garbage, so I sprayed them with bedliner. The truck is about the get rebuilt , but 'til then this looks pretty good for $9. Pretty easy, figured I'd share.........

boy those look real good .....wonder if it would crack at -40 C
plastic coat i've used would still scratch

MYNAMEISMUD · 01-15-2012, 11:35 PM

@Motornut....I'm not sure about the temperature tolerances. I make it a habit to never go anywhere that the temp gets below freezing.....ever, no matter what

oldschool18 · 01-16-2012, 02:00 AM

I used to you that stone chip gaurd stuff you would spray on the bottom half of you ext and down on the rockers panels when I built tweeters into the plastic pillars by the winshields. it gave a nice texture. I did the bedliner stuff on door panels before and in the heat it was very easy to scratch that stuff off

TheApocalyptican · 01-16-2012, 03:43 AM

Looks good.

Just as an fyi for anyone else who wants to do this....the rustoleum is better for less texture. In my experience(which is many cans)the duplicolor spray bedliner is much more textured than the rustoleum.

iceship · 01-16-2012, 03:51 AM

I was going to line-x my doorpanels but the grit is just so big... Thats never coming off...
Posted via Mobile Device

motornut · 01-16-2012, 08:01 AM

Quote:

Originally Posted by MYNAMEISMUD

@Motornut....I'm not sure about the temperature tolerances. I make it a habit to never go anywhere that the temp gets below freezing.....ever, no matter what

I wish, lol there are colder places then here , it's -26 this morning,-33 windchill
that may blow some peoples minds,and rads lol

jitteryguy · 01-16-2012, 10:45 AM

Quote:

Originally Posted by iceship

I was going to line-x my doorpanels but the grit is just so big... Thats never coming off...
Posted via Mobile Device

I have several Kawasaki Terex's , some of em were spay'd with Line-X.
grant'd I've had these here for right a year, the Line-X is peel'n off in sheet's. when it come's off it look's like they prep'd em good , it's just once a spot does break loose and the air can get to it spread's quickly.

iceship · 02-12-2012, 10:13 PM

Motornut... is it soft rubbery or hard.... so do you still like it so far..

motornut · 02-14-2012, 10:25 PM

Quote:

Originally Posted by iceship

Motornut... is it soft rubbery or hard.... so do you still like it so far..

Wasn't me ,it was mynameismud
Posted via Mobile Device

ivorton74 · 02-15-2012, 01:51 AM

that looks like something i wanna try.my door panels look all faded and ugly

Weasel Diesel · 02-15-2012, 11:24 AM

I love spray on bedliner stuff. You can hide all sorts of flaws with that stuff. I figure if it can hide nasty flaws on the truck that good, It ought to be safe enough and worth the try to spray the wife with...

iceship · 08-03-2012, 01:33 AM

What brand did you use..
Posted via Mobile Device

01-15-2012, 08:58 PM	#1
MYNAMEISMUD Registered User Join Date: Dec 2011 Location: Mesa AZ Posts: 18	Bedliner on door panels... Mine looked like garbage, so I sprayed them with bedliner. The truck is about the get rebuilt , but 'til then this looks pretty good for $9. Pretty easy, figured I'd share......... __________________ THE DEVIL MADE ME DO IT!

01-15-2012, 09:08 PM	#2
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: Bedliner on door panels... It looks like it came out like black dye. Did it leave or add any texture? __________________ John 82 Chevy Silverado 350ci/TH350

01-15-2012, 09:14 PM	#3
MYNAMEISMUD Registered User Join Date: Dec 2011 Location: Mesa AZ Posts: 18	Re: Bedliner on door panels... It does add a slight texture. Kind of like a grip-taped skateboard, with paint on it. Really, perfect for the door panels. __________________ THE DEVIL MADE ME DO IT!

01-15-2012, 09:30 PM	#4
str8axle55 Registered User Join Date: May 2009 Location: Weymouth Ma Posts: 489	Re: Bedliner on door panels... Looks good, I like it. __________________ 03 GMC Yukon XL 2500 Quadrasteer, wife`s DD 84 Chevy K30 CC SRW 55 Chevy 210 2dr post

01-15-2012, 09:56 PM	#5
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Bedliner on door panels... That turned out purdy good ! What kind of prep did you do before spray'n ? __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

01-15-2012, 10:10 PM	#6
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Bedliner on door panels... nice work __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

01-15-2012, 11:07 PM	#7
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Bedliner on door panels... Damn now to decide between this or Krylon....Nice though, I like it it a lot

01-15-2012, 11:19 PM	#9
Texasupton1 Registered User Join Date: Oct 2011 Location: Rowlett Texas Posts: 70	Re: Bedliner on door panels... Now why couldnt you do the same thing with a dash pad? Trim up the cracks, fill them in with some sort of plastic body filler or such, then spray with bed liner. Couldnt you then use a something like Plastikote with color to go over the bed liner?

01-15-2012, 11:35 PM	#11
MYNAMEISMUD Registered User Join Date: Dec 2011 Location: Mesa AZ Posts: 18	Re: Bedliner on door panels... @Motornut....I'm not sure about the temperature tolerances. I make it a habit to never go anywhere that the temp gets below freezing.....ever, no matter what __________________ THE DEVIL MADE ME DO IT!

01-16-2012, 02:00 AM	#12
oldschool18 Registered User Join Date: Jan 2010 Location: Hollidaysburg, PA Posts: 785	Re: Bedliner on door panels... I used to you that stone chip gaurd stuff you would spray on the bottom half of you ext and down on the rockers panels when I built tweeters into the plastic pillars by the winshields. it gave a nice texture. I did the bedliner stuff on door panels before and in the heat it was very easy to scratch that stuff off __________________ _________________________________ 62 Impala 70 C-10 LWB 71 K-10 SWB 85 C-10 LWB==SOLD 01 2500 HD Members Met......2003Silverado (Dave)

01-16-2012, 03:43 AM	#13
TheApocalyptican Registered User Join Date: Jun 2010 Location: Las Vegas, Nv Posts: 312	Re: Bedliner on door panels... Looks good. Just as an fyi for anyone else who wants to do this....the rustoleum is better for less texture. In my experience(which is many cans)the duplicolor spray bedliner is much more textured than the rustoleum. __________________ 1995 Suburban K2500 454.....off road & towing 1999 Astro, work van 2006 Silverado 2wd 5.3 w/4.5" lift and 33s

01-16-2012, 03:51 AM	#14
iceship Registered User Join Date: Apr 2011 Location: bowling green, ky Posts: 439	Re: Bedliner on door panels... I was going to line-x my doorpanels but the grit is just so big... Thats never coming off... Posted via Mobile Device

02-12-2012, 10:13 PM	#17
iceship Registered User Join Date: Apr 2011 Location: bowling green, ky Posts: 439	Re: Bedliner on door panels... Motornut... is it soft rubbery or hard.... so do you still like it so far..

02-15-2012, 01:51 AM	#19
ivorton74 Registered User Join Date: Nov 2011 Location: South Dakota Posts: 916	Re: Bedliner on door panels... that looks like something i wanna try.my door panels look all faded and ugly

02-15-2012, 11:24 AM	#20
Weasel Diesel Registered User Join Date: Sep 2011 Location: Chesterfield, Va. Posts: 339	Re: Bedliner on door panels... I love spray on bedliner stuff. You can hide all sorts of flaws with that stuff. I figure if it can hide nasty flaws on the truck that good, It ought to be safe enough and worth the try to spray the wife with...



Register or Log In To remove these advertisements.

08-03-2012, 01:33 AM	#21
iceship Registered User Join Date: Apr 2011 Location: bowling green, ky Posts: 439	Re: Bedliner on door panels... What brand did you use.. Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.