AZ Factory lowback PICK UP bucket seats with correct weld in brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 02-14-2012, 10:32 PM

This is for LOCAL pick up only at this time. These are just big and bulky and since they are one piece just not easy to ship. Need recovered.Foam looks worse than it is. I also have the correct console for these in a seperate posting.. I have more than one pair of these but this is the only set with truck brackets. Want $250 and once again these are for LOCAL PICK UP ONLY.
[IMG]

[/IMG]
[IMG]

[/IMG]

88Jimmy4x4 · 02-15-2012, 09:07 AM

can you post a pic of the bottoms?

JNJchev77 · 02-15-2012, 04:19 PM

Pm sent to you Jeff!

**1774btcrew** · 02-16-2012, 09:28 PM

I have pictures of the bottoms. Just have to transfer them to photobucket!

**1774btcrew** · 02-25-2012, 11:14 PM

These are still available! Thought Broey wanted them but haven't heard from him
Posted via Mobile Device

joe231 · 02-26-2012, 12:44 AM

what years are these factory correct?

**1774btcrew** · 02-28-2012, 01:06 AM

These are correct for 73-77 maybe 78. Will look right in all 73-80 models though.
Posted via Mobile Device

**N2TRUX** · 02-28-2012, 01:14 AM

Quote:

Originally Posted by 1774btcrew

These are correct for 73-77 maybe 78. Will look right in all 73-80 models though.

To be accurate the low backs went to mid year in 77. Some of the later 77's and all 78+ had highbacks. With that said, I feel the low backs look good in all year models.

joe231 · 02-28-2012, 01:41 AM

Thanks for the info!
Posted via Mobile Device

**1774btcrew** · 03-06-2012, 06:14 PM

These are still available. It is REALLY hard to come up with pick up brackets. I have seen just the braclets priced at $300
Posted via Mobile Device

**1774btcrew** · 03-20-2012, 02:25 PM

Responded to PM!

meanbite · 03-22-2012, 11:36 AM

I'm interested if these are still available

**1774btcrew** · 03-22-2012, 02:45 PM

As of now they are still available but for local pick up in Phoenix AZ. Shipping just gets too involved on these!

**1774btcrew** · 03-28-2012, 12:58 PM

Buyer TOTALLY flaked out! Said he was buying them so I didn't sell them to anyone else and he bought a bench seat instead! There are a lot of lowbacks on here but how many have pick up brackets where they are a direct bolt in?

Renagade61 · 03-29-2012, 12:30 AM

You know its very easy to ship this. All you have to do is get a box that a washer or dryer comes in and put one in sitting up and turn the other one upside down on top of it. Wrap the brackets real go and put them between the seats. I will take them at $250.00 plus the shipping.Zip 28337. Let me know. Danny

**1774btcrew** · 05-20-2012, 03:33 PM

Someone buy these. They are really hard to come by with all of the hardware. Lots of Blazer seats out there but not many factory pick up buckets.

02-14-2012, 10:32 PM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Factory lowback PICK UP bucket seats with correct weld in brackets This is for LOCAL pick up only at this time. These are just big and bulky and since they are one piece just not easy to ship. Need recovered.Foam looks worse than it is. I also have the correct console for these in a seperate posting.. I have more than one pair of these but this is the only set with truck brackets. Want $250 and once again these are for LOCAL PICK UP ONLY. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] Last edited by 1774btcrew; 02-29-2012 at 10:59 AM.

02-15-2012, 09:07 AM	#2
88Jimmy4x4 Registered User Join Date: Oct 2003 Location: houston, texas Posts: 1,974	Re: Factory lowback PICK UP bucket seats with correct weld in brackets can you post a pic of the bottoms? __________________ 2008 Silverado Z71 RCSB 1991 GMC Jimmy 4x4 1976 GMC Sierra C15 SWB

02-15-2012, 04:19 PM	#3
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: Factory lowback PICK UP bucket seats with correct weld in brackets Pm sent to you Jeff! __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo

02-16-2012, 09:28 PM	#4
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Factory lowback PICK UP bucket seats with correct weld in brackets I have pictures of the bottoms. Just have to transfer them to photobucket!

02-25-2012, 11:14 PM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Factory lowback PICK UP bucket seats with correct weld in brackets These are still available! Thought Broey wanted them but haven't heard from him Posted via Mobile Device Last edited by 1774btcrew; 02-25-2012 at 11:19 PM.

02-26-2012, 12:44 AM	#6
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Factory lowback PICK UP bucket seats with correct weld in brackets what years are these factory correct? __________________ *CHEVY ONLY*

02-28-2012, 01:06 AM	#7
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Factory lowback PICK UP bucket seats with correct weld in brackets These are correct for 73-77 maybe 78. Will look right in all 73-80 models though. Posted via Mobile Device

02-28-2012, 01:41 AM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Factory lowback PICK UP bucket seats with correct weld in brackets Thanks for the info! Posted via Mobile Device __________________ *CHEVY ONLY*

03-06-2012, 06:14 PM	#10
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Factory lowback PICK UP bucket seats with correct weld in brackets These are still available. It is REALLY hard to come up with pick up brackets. I have seen just the braclets priced at $300 Posted via Mobile Device

03-20-2012, 02:25 PM	#11
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Factory lowback PICK UP bucket seats with correct weld in brackets Responded to PM!

03-22-2012, 11:36 AM	#12
meanbite Registered User Join Date: Jan 2012 Location: Rock Hill SC Posts: 44	Re: Factory lowback PICK UP bucket seats with correct weld in brackets I'm interested if these are still available

03-22-2012, 02:45 PM	#13
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Factory lowback PICK UP bucket seats with correct weld in brackets As of now they are still available but for local pick up in Phoenix AZ. Shipping just gets too involved on these!

03-28-2012, 12:58 PM	#14
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Factory lowback PICK UP bucket seats with correct weld in brackets Buyer TOTALLY flaked out! Said he was buying them so I didn't sell them to anyone else and he bought a bench seat instead! There are a lot of lowbacks on here but how many have pick up brackets where they are a direct bolt in?

03-29-2012, 12:30 AM	#15
Renagade61 Registered User Join Date: Feb 2009 Location: White Lake NC. Posts: 48	Re: Factory lowback PICK UP bucket seats with correct weld in brackets You know its very easy to ship this. All you have to do is get a box that a washer or dryer comes in and put one in sitting up and turn the other one upside down on top of it. Wrap the brackets real go and put them between the seats. I will take them at $250.00 plus the shipping.Zip 28337. Let me know. Danny

05-20-2012, 03:33 PM	#16
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Factory lowback PICK UP bucket seats with correct weld in brackets Someone buy these. They are really hard to come by with all of the hardware. Lots of Blazer seats out there but not many factory pick up buckets.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.