WI Wtb door latch reinforcement plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bigb401 · 03-02-2012, 03:41 PM

I need a passenger and driver door latch reinforcement plate. Anyone got a set or know who does?
Posted via Mobile Device

**Classic Bowties** · 03-02-2012, 04:58 PM

Quote:

Originally Posted by Bigb401

I need a passenger and driver door latch reinforcement plate. Anyone got a set or know who does?
Posted via Mobile Device

I have a couple of sets available, cost would be $30./each set plus $7. for USPS priority shipping. Mel

Bigb401 · 03-02-2012, 09:36 PM

Ok thanks I'll take a set. What kind of condition are they in? Do you have the screws to go with them. Can I pay you through PayPal?
Posted via Mobile Device

Ridnhi · 03-02-2012, 10:23 PM

Big- I hope you don't mind me jumping in and telling classic bowties that I would be interested in a set of these as well.

Bigb401 · 03-02-2012, 10:39 PM

No it's all good. I don't mind. Either of you know anyone who would have a 72 passenger door rust free for sale?
Posted via Mobile Device

Ridnhi · 03-02-2012, 10:58 PM

I may have a true blazer door for sale if I pick up a set of nice reinforcements, not sure if it is a 72 though. I have some pics of it in the blazer section in the "worth saving blazer door or not" thread. The door already has the reinforcement on it. it is not completely rust free, but close.

Bigb401 · 03-02-2012, 11:08 PM

I looked couldn't find it. Do u have pics?
Posted via Mobile Device

Ridnhi · 03-02-2012, 11:27 PM

here are a couple of pics

Ridnhi · 03-02-2012, 11:30 PM

sorry, please excuse the two middle pics of the last post, those are the bottom of the drivers door. these are the bottom of the pass door, its not as nice.

Bigb401 · 03-02-2012, 11:41 PM

I'm not a body guy so I'm pretty fearful of rust. I'll pass on those doors thanks anyways

Posted via Mobile Device

Ridnhi · 03-02-2012, 11:47 PM

no prob.

**Classic Bowties** · 03-03-2012, 01:33 AM

Quote:

Originally Posted by Bigb401

Ok thanks I'll take a set. What kind of condition are they in? Do you have the screws to go with them. Can I pay you through PayPal?Posted via Mobile Device

Quote:

Originally Posted by Ridnhi

Big- I hope you don't mind me jumping in and telling classic bowties that I would be interested in a set of these as well.

Bigb401, here they are and you have first choice since its your WTB thread, Ridnhi you are up after he decides. The top two sets are in the best shape, one side from the bottom black set is getting real thin (see last pic) around the edges but is still a usable piece, could be trimmed back and or repaired as these get welded in anyhow. If you decide on a set, pm me an e-mail address and I will send you a paypal invoice. Mel

Bigb401 · 03-03-2012, 01:58 AM

The yellow ones look to be in the most solid condition if I'm correct. So I think I'll take them. Do you know why they have different hole patterns?
Posted via Mobile Device

**Classic Bowties** · 03-03-2012, 02:45 AM

Quote:

Originally Posted by Bigb401

The yellow ones look to be in the most solid condition if I'm correct. So I think I'll take them. Do you know why they have different hole patterns?
Posted via Mobile Device

The three door latch screw holes (the ones with tapered edge) are the only fixed location holes, all the other holes in varying locations are the drilled out spot welds which were placed wherever. Mel

**Classic Bowties** · 03-04-2012, 12:23 PM

Quote:

Originally Posted by Bigb401

The yellow ones look to be in the most solid condition if I'm correct. So I think I'll take them.Posted via Mobile Device

An invoice has been sent by paypal on the ochre pair. Mel

Ridnhi · 03-04-2012, 10:00 PM

I'll take the red set.

**Classic Bowties** · 03-05-2012, 01:54 PM

Quote:

Originally Posted by Ridnhi

I'll take the red set.

An invoice has been sent by paypal on the red pair. Mel

**Classic Bowties** · 03-05-2012, 10:28 PM

Quote:

Originally Posted by Bigb401

The yellow ones look to be in the most solid condition if I'm correct. So I think I'll take them. Posted via Mobile Device

Quote:

Originally Posted by Ridnhi

I'll take the red set.

Both sets of latch plates have been sent out, parts were sent USPS priority and the postal reciept projects that you both should see them this Wed. 03/07. Mel

Bigb401 · 03-05-2012, 10:35 PM

Thanks
Posted via Mobile Device

DustinU · 08-05-2012, 09:42 AM

If you still have the third reinforcement plate that didn't sell above, I'll take them

**Classic Bowties** · 08-05-2012, 11:14 AM

Quote:

Originally Posted by DustinU

If you still have the third reinforcement plate that didn't sell above, I'll take them

Yes, I have above pictured black pair yet. Send me a pm with your email address and I will return an invoice to you through paypal. Thanks, Mel.

**Classic Bowties** · 08-07-2012, 12:49 AM

Quote:

Originally Posted by DustinU

If you still have the third reinforcement plate that didn't sell above, I'll take them

*All three sets of pictured latch plates have now been sold.* The black set of plates went out today-08/06 USPS priority and the postal reciept projects that you should see them this Wed. 08/08. Thanks again, Mel.

03-02-2012, 03:41 PM	#1
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Wtb door latch reinforcement plates I need a passenger and driver door latch reinforcement plate. Anyone got a set or know who does? Posted via Mobile Device __________________ Proud to be IBEW Local 2150

03-02-2012, 09:36 PM	#3
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Wtb door latch reinforcement plates Ok thanks I'll take a set. What kind of condition are they in? Do you have the screws to go with them. Can I pay you through PayPal? Posted via Mobile Device __________________ Proud to be IBEW Local 2150

03-02-2012, 10:23 PM	#4
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Wtb door latch reinforcement plates Big- I hope you don't mind me jumping in and telling classic bowties that I would be interested in a set of these as well. __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

03-02-2012, 10:39 PM	#5
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Wtb door latch reinforcement plates No it's all good. I don't mind. Either of you know anyone who would have a 72 passenger door rust free for sale? Posted via Mobile Device __________________ Proud to be IBEW Local 2150

03-02-2012, 10:58 PM	#6
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Wtb door latch reinforcement plates I may have a true blazer door for sale if I pick up a set of nice reinforcements, not sure if it is a 72 though. I have some pics of it in the blazer section in the "worth saving blazer door or not" thread. The door already has the reinforcement on it. it is not completely rust free, but close. __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

03-02-2012, 11:08 PM	#7
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Wtb door latch reinforcement plates I looked couldn't find it. Do u have pics? Posted via Mobile Device __________________ Proud to be IBEW Local 2150

03-02-2012, 11:27 PM	#8
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Wtb door latch reinforcement plates here are a couple of pics Attached Images __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

03-02-2012, 11:30 PM	#9
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Wtb door latch reinforcement plates sorry, please excuse the two middle pics of the last post, those are the bottom of the drivers door. these are the bottom of the pass door, its not as nice. Attached Images __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

03-02-2012, 11:41 PM	#10
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Wtb door latch reinforcement plates I'm not a body guy so I'm pretty fearful of rust. I'll pass on those doors thanks anyways Posted via Mobile Device __________________ Proud to be IBEW Local 2150

03-02-2012, 11:47 PM	#11
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Wtb door latch reinforcement plates no prob. __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

03-03-2012, 01:58 AM	#13
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Wtb door latch reinforcement plates The yellow ones look to be in the most solid condition if I'm correct. So I think I'll take them. Do you know why they have different hole patterns? Posted via Mobile Device __________________ Proud to be IBEW Local 2150

03-04-2012, 10:00 PM	#16
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Wtb door latch reinforcement plates I'll take the red set. __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

03-05-2012, 10:35 PM	#19
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Wtb door latch reinforcement plates Thanks Posted via Mobile Device __________________ Proud to be IBEW Local 2150

08-05-2012, 09:42 AM	#20
DustinU Registered User Join Date: Feb 2012 Location: Orange, CA Posts: 300	Re: Wtb door latch reinforcement plates If you still have the third reinforcement plate that didn't sell above, I'll take them

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.