Disc brake conversion and wheel clearance question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mark '87 930 · 03-12-2012, 07:36 PM

I recently picked up a '56 3100 that has 15" Cragar wheels on it. The first thing i want to do is put on a disc brake conversion (likely front only to start). That said, I want to get a 6-lug rotor so i can keep the existing wheels...BUT, how will i know if the 15" wheels will have enough clearance with the caliper?

I dont' want to buy a kit and then have to buy new wheels.. Here's a picture of the wheel type..

Thoughts?

03-12-2012, 07:36 PM	#1
mark '87 930 Registered User Join Date: Nov 2011 Location: Toronto, Ontario Posts: 222	Disc brake conversion and wheel clearance question I recently picked up a '56 3100 that has 15" Cragar wheels on it. The first thing i want to do is put on a disc brake conversion (likely front only to start). That said, I want to get a 6-lug rotor so i can keep the existing wheels...BUT, how will i know if the 15" wheels will have enough clearance with the caliper? I dont' want to buy a kit and then have to buy new wheels.. Here's a picture of the wheel type.. Thoughts? Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.