20x10 All 4 Corners

[Watts]

I noticed a lot of people went with 20x8.5 up front with their boss or showwheel set up. I did the measuring and to me it looks like a 20x10 showwheel streeter will fit up front. What have you guys experienced with this set up.

I want to use 20x10 with 5.5bs and 0 offset on all 4 corners.
Posted via Mobile Device

[tubbedII]

How low you go and your tire size matters in this situation. With about a 3/4 drop my bro's C10 had 15x10's all around with no issues, but I have no idea what the bs was on them.

[broey]

I run 22x10s on all 4. had to narrow the front 2 inches to tuck.

[Pro Performance]

On a stock dropmember (not tucked in at all) the 20x10 will be tight up front and most likely rub depending on how low you go. I would suggest the 8.5" up front. If you did do a 10" wheel up front, I think it will take more than a 5.5" BS to clear the fender, etc.

Let me know if you have questions or want to further discuss your options. We are a Showwheels dealer, so I would be glad to help you out.

[jbice70gmc]

trenz68 has 20X10 on all four corners 6.5 BS front 5 BS rear. They look really nice.

[Pro Performance]

It can be done, just have to make room for them!

[El Campo]

I had 20x10 intros with 5 inch back spacing all the way around. The problem was that I had a 75 front end on it and it is 3 inches wider than my rearend. So it looked ridiculous. You need to have different back spacing in the front unless your front end is narrower than mine. Im sending mine back an getting 8.5 inch hoops put on
Posted via Mobile Device