Bit the bullet/Let me know what you think?

[Nitschke]

Here is what I ordered today:
LY6 2010 80k
6L80E 2009 2miles

Included:
ECM
TCM
Fuse box
Exhaust manifolds
Accessories: starter, alt, ps pump, bracket
Wiring harnesses
Mass air

TOTAL : $2964.00
Aso putting a Mast VVT cam & springs in this

Any heads up on this swap would be aprisheated.
Going in 72 chevy truck
Posted via Mobile Device

[Indian113]

Did you get the pedal assembly and wiring for it?
That should be a DBW set up!
By the way sounds like a good deal,you should get a lot of miles out of it.

[Nitschke]

No pedal. They did not have one. =( got it all from LKQ. I'm very happy with my experience. This guy was very helpful Justin 469-941-3743 tell him Adam sent you he saved me about $500 bones which makes me happy. Payed for my cam that's how I look at it.

[72gmcshorty]

shame it will probably cost you a couple hundred for the pedal...but keep posted witth your build

[clinebarger]

Originally Posted by Nitschke

Here is what I ordered today:
LY6 2010 80k
6L80E 2009 2miles

Included:
ECM
TCM
Fuse box
Exhaust manifolds
Accessories: starter, alt, ps pump, bracket
Wiring harnesses
Mass air

TOTAL : $2964.00
Aso putting a Mast VVT cam & springs in this

Any heads up on this swap would be aprisheated.
Going in 72 chevy truck
Posted via Mobile Device

The ECM & TCM have to be "flash matched" or out of the same vehicle.
The TCM is inside the transmission, So if they are sending a "external" TCM its no good to you.

Any more details on the ECM and what its out of?

[Nitschke]

Originally Posted by clinebarger

The ECM & TCM have to be "flash matched" or out of the same vehicle.
The TCM is inside the transmission, So if they are sending a "external" TCM its no good to you.

Any more details on the ECM and what its out of?

O really it is probably The one in it. I just asked if it was included. Good to know. Both out of Yukons one is 09, 10. Will it still need to be flashed?
Posted via Mobile Device

[clinebarger]

Originally Posted by Nitschke

O really it is probably The one in it. I just asked if it was included. Good to know. Both out of Yukons one is 09, 10. Will it still need to be flashed?
Posted via Mobile Device

The TCM will need a reflash, Its VIN specific. You can either......build the truck & take the whole thing to a tuner/Have the tuner come to you, Or remove the TCM & Valve body & send it off along with the ECM to get tuned/reflashed.

[Shon]

Or convert to a throttle cable style and rewire as needed.

[Nitschke]

Would I need any DBW from the same year as the motor like any gm car or truck of the same year or more specific? Thanks for the info, specific as posibal is ok.

Also anyone have any good wiring diagrams that would like to share for this including trans wires.
Posted via Mobile Device

[Indian113]

Nitschke,I have a DBW pedal and harness for the pedal from a 2004. If it would work for you it's yours if you pay the freight. Ray

[Nitschke]

Originally Posted by Indian113

Nitschke,I have a DBW pedal and harness for the pedal from a 2004. If it would work for you it's yours if you pay the freight. Ray

Wow that's very kind of you. I'll try and fined out and if so I'll take you up on that offer. Thank you!
Posted via Mobile Device

[clinebarger]

Originally Posted by Shon

Or convert to a throttle cable style and rewire as needed.

Can you do that to a E38 ECM?

[Indian113]

I have a DBW ECM and the guy that is working on my wiring told me he could set it up for a Cable drive as I can't use the DBW with a 700r4

[Indian113]

Originally Posted by Nitschke

Wow that's very kind of you. I'll try and fined out and if so I'll take you up on that offer. Thank you!
Posted via Mobile Device

Becareful, try to keep it quiet about me being kind to anybody-you'll ruin my image

Just trying to help out I might need something sometime myself!!

[clinebarger]

Originally Posted by Indian113

I have a DBW ECM and the guy that is working on my wiring told me he could set it up for a Cable drive as I can't use the DBW with a 700r4

Your running a Gen III 24X engine, Nitschke has a Gen IV 58X engine & running a 6 speed auto this really limits him on what he can do. The DBW pedal off a 04 itself may work, But I would just get the correct part.

[Indian113]

Thanks, This is all new territory for me. I was hoping I could help out.

[Nitschke]

Got the motor trans in here are some pics. I checked the numbers it is what its sopost to be! I pulled the valve cover off it looks excellent!
Let me know what you think? Im going to start a build thread I think.

Anyone know a good way to clean the ox off the the heads? I dont want to paint them and im going to beed blast all the things i can to clean them.






O and what is this? It came 20min after the motor via UPS. and do i need it?

[clinebarger]

Originally Posted by Nitschke

Got the motor trans in here are some pics. I checked the numbers it is what its sopost to be! I pulled the valve cover off it looks excellent!
Let me know what you think? Im going to start a build thread I think.

O and what is this? It came 20min after the motor via UPS. and do i need it?

Thats a BCM body control module, Never seen that style in a truck. Regardless....Its no good to you

Where is the ECM?
Did it come with a separate harness? The one on the engine is cut up.

The transmission is out of a 4WD/AWD truck/SUV, Is that what you wanted?

[Nitschke]

Originally Posted by clinebarger

Thats a BCM body control module, Never seen that style in a truck. Regardless....Its no good to you

Where is the ECM?
Did it come with a separate harness? The one on the engine is cut up.

The transmission is out of a 4WD/AWD truck/SUV, Is that what you wanted?

Thanks about the bcm. Yes the ECM, harness, fuse box. Are coming separate. The trans I could not fined one 2wd for a decent price. So I'll just convert this one into a 2wd.
Posted via Mobile Device