|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-04-2012, 10:46 PM
|
#1 |
|
Registered User
Join Date: May 2011
Location: Texas
Posts: 984
|
Waterpump woes, someone help please.
My mom just went to advance and bought me a waterpump. It's a gmb for 27.99 but my original pump has bolt like prongs where the pulley connects to it, the problem is the new pump doesn't have these prongs. And they are pretty frozen on the old one. What to do? Any advice is appreciated. Thanks.
Posted via Mobile Device |
|
|
|
05-04-2012, 10:50 PM
|
#2 |
|
Registered User
Join Date: Feb 2012
Location: Depew, OK
Posts: 204
|
Re: Waterpump woes, someone help please.
They sell the studs, just pick you some up in the morning and you will be good to go.
__________________
~Jon Ol Green 1970 K10ish LWB,454/400/205, been in family since new.
My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=516056 |
|
|
|
|
05-04-2012, 11:02 PM
|
#3 |
|
Registered User
Join Date: Jun 2000
Location: Wichita Falls,Tx
Posts: 56
|
Re: Waterpump woes, someone help please.
Those studs come out and are used in the new pump.
Just use two of the nuts that hold the fan on. Run two of the nuts onto a stud and take two wrenches and tighten the two nuts against each other. Then turn out the stud with one wrench on the bottom nut. Then tighten the stud into the other pump turning the top nut. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
