|
07-09-2012, 06:18 PM
|
#1 |
|
Registered User
Join Date: Aug 2011
Location: Massachusetts
Posts: 66
|
1990 Blazer code 32
Recently the "service engine soon" light came on my 1990 Blazer. I scanned for codes using the paper clip method. I got a code 32 (EGR SYSTEM). So I put in a known good, working, negative backpressure EGR Valve from a different TBI Blazer, which did run good before I pulled the EGR Valve. I drove it around that day with no more SES light. Yesterday I was driving it and the SES light came on again. So I scanned for codes again and got code 32. I have noticed that I have been getting bad gas mileage and a foul smell from the exhaust (which has no catalytic converter present.) The truck also has a new Delphi IAC Valve. The engine runs good and has plenty of power, no hesitation or bucking and the injector spray pattern looks very good.
|
|
|
|
07-17-2012, 12:56 AM
|
#2 |
|
Registered User
Join Date: Aug 2011
Location: Massachusetts
Posts: 66
|
Re: 1990 Blazer code 32
Fixed the problem myself. Thanks everyone.
|
|
|
|
|
07-17-2012, 01:22 PM
|
#3 | |
|
Registered User
Join Date: Oct 2003
Location: OC CA
Posts: 1,374
|
Re: 1990 Blazer code 32
Quote:
//RF
__________________
"The Beast" 1975 Chevrolet C20 longbed 350/700R4! with 3inch body lift Dual Flowmasters Super 40's! TBI retrofit completed (2007-07-29)  New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17) |
|
|
|
|
|
07-17-2012, 02:23 PM
|
#4 |
|
Registered User
Join Date: Aug 2011
Location: Massachusetts
Posts: 66
|
Re: 1990 Blazer code 32
I replaced the EGR valve, then I reset the ECM. SES light stopped coming on.
|
|
|
|
|
08-29-2012, 11:14 AM
|
#5 |
|
Registered User
Join Date: Jan 2009
Location: Arkansas
Posts: 687
|
Re: 1990 Blazer code 32
How do you reset the ECM?
I got a 32 code too. Going to replace the EGR valve and hopefully that will fix it. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
