|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-11-2012, 11:08 PM
|
#1 |
|
Registered User
Join Date: May 2012
Location: dallas ga
Posts: 15
|
clarify for current project
Ok I have a 70 c10 2wd short bed stepside.I got 72 spindles and complete brakes including the rear end. I read the swap thread and as I inderstand it I have to use 72 balljoints and tierod ends. Am I correct?
|
|
|
|
07-12-2012, 12:22 PM
|
#2 |
|
67-72 parts collector,…
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: clarify for current project
Yes.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
07-13-2012, 12:00 AM
|
#3 | |
|
Registered User
Join Date: May 2012
Location: dallas ga
Posts: 15
|
Re: clarify for current project
 Quote:
|
|
|
|
|
|
07-13-2012, 12:05 AM
|
#4 |
|
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: clarify for current project
Keep us posted of your progress.
I would use the steering linkage off the '72 also. (centerlinks and all the tie rods)
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
07-13-2012, 12:07 AM
|
#5 |
|
Registered User
Join Date: May 2012
Location: dallas ga
Posts: 15
|
Re: clarify for current project
i was doing the outers already. what is the reason for the rest?
|
|
|
|
|
07-13-2012, 12:15 AM
|
#6 |
|
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: clarify for current project
Your '70 inner tie rods are 5/8" diameter, and RH thread.
The '72 outer tier rods are 11/16" diameter and ALSO RH thread. The 72 center link is different. (larger holes for the inner tie rods than your 70) Tie rods and center link are either 63-70 or 71-72.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
07-13-2012, 12:16 AM
|
#7 |
|
Registered User
Join Date: May 2012
Location: dallas ga
Posts: 15
|
Re: clarify for current project
dam ok ill make a call in the morning
thanks |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
