Two jacks to fix a flat. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grs · 08-20-2012, 06:40 PM

My truck is lowered. I could not get a jack under the front to change a flat. I bought a very small hydraulic jack. I use it under the frame at the very front of the truck. I raise the truck so the control arm raises up enough to get my big scissor jack under it. Then up it goes.

INSIDIOUS '86 · 08-20-2012, 06:49 PM

Same with mine or I drive over something like a brick or a couple peices of wood.
Posted via Mobile Device

muthstryker · 08-20-2012, 06:51 PM

LOL I know what you mean, I actually play musical Jacks to get my truck up!

HTX86chevy · 08-20-2012, 07:42 PM

I don't have this problem yet since I haven't gotten around to dropping my truck. This is good info though.... Just curious, do you think the low profile Jacks from HF would fit under ? I have on and use it all the time . It works great but I use it on my stock height 86, stock height 01 and Lifted 08 Jeep Patriot.

mopar346 · 08-20-2012, 08:56 PM

Ruined a perfectly good truck.

INSIDIOUS '86 · 08-20-2012, 09:25 PM

Also watch how sewer drains become your headers and a arms worst nightmare with a flat tire lol
Posted via Mobile Device

J Knight · 08-20-2012, 09:47 PM

If you keep the stock/factory jack in the truck, it still works with a lowered truck. For the front it has a low slung hook that fits the front of the lower control arms and for the rear it still fits under the axle tube. You can also use a scissor jack like a lot of late model cars have that doesnt take up much space.

grs · 08-20-2012, 09:55 PM

Quote:

Originally Posted by HTX86chevy

I don't have this problem yet since I haven't gotten around to dropping my truck. This is good info though.... Just curious, do you think the low profile Jacks from HF would fit under ? I have on and use it all the time . It works great but I use it on my stock height 86, stock height 01 and Lifted 08 Jeep Patriot.

If your truck is lowered let the air out of the tire then measure, and see if your jack will work.

cory d · 08-21-2012, 12:36 AM

im just high enough to get away with not having to do that.

Quote:

Originally Posted by mopar346

Ruined a perfectly good truck.

i bet my lowered truck spends more time off road and on rough logging roads then 99% of the lifted trucks around here. excluding all the teenaged hicks. they take any chance they get to put some mud on their trucks

mongoose · 08-21-2012, 12:49 AM

Quote:

Originally Posted by cory d

im just high enough to get away with not having to do that.

i bet my lowered truck spends more time off road and on rough logging roads then 99% of the lifted trucks around here. excluding all the teenaged hicks. they take any chance they get to put some mud on their trucks

really? lol... I for see i5 taking it;s toll on my truck... especially.. through bellingham.. ugh.

Yeah, I have to jack it up on the roll bar then block it up then move the jack to the control arm... total pain!!!!! future mod for sure has to be air jacks! easy to jack up and cool as hell too boot.

Keith Seymore · 08-21-2012, 07:12 AM

Quote:

Originally Posted by mopar346

Ruined a perfectly good truck.

Mine's been a daily driver for 26 years and 196,000 miles.

Seems to be holding up ok.

K

mopar346 · 08-21-2012, 07:16 AM

Kinda like the kids with their pants hanging off the butts.

Just busting on the "lowered" class.

Not my thing, but I appreciate anything done well, except maybe 4 door sedans, wagons I get.

gchemist · 08-21-2012, 07:30 AM

I bought an aluminum lower jack. I think it's only 3" high at the lift point. It barely fits under the a-arm! Works great.

KQQL IT · 08-21-2012, 10:37 AM

Who carries a spare? My exhaust runs thru that area.
Posted via Mobile Device

cory d · 08-21-2012, 10:47 AM

Quote:

Originally Posted by KQQL IT

Who carries a spare? My exhaust runs thru that area.
Posted via Mobile Device

i didnt then my dad said i was stupid, so i threw a spare in the bed. weeks later i got a flat

gchemist · 08-21-2012, 10:55 AM

I carry a spare in the bed with a floor jack. They are tied together with a chain. So far, no one has stole them. I also cover them with a blanket. I could go without a spare. As long as I'm in the city limits, I can get a tow. My insurance will send me back $75.

grs · 08-21-2012, 12:09 PM

Quote:

Originally Posted by KQQL IT

Who carries a spare? My exhaust runs thru that area.
Posted via Mobile Device

My spare is bolted to the floor with a chain, and padlock. Harder to steal. I carry two jacks. I my drive it to Texas. That is a 1,000 mile trip. May be moving.

Billett · 08-21-2012, 12:25 PM

I bought a low profile racing jack for my dropped s10 and haven't had any problems with it.

mopar346 · 08-21-2012, 03:16 PM

Sorry for a brief highjack - we were talking about jacks right?

GRS, That is a Merc emblem in the center of your tire. Does it mean anything?

The reason I ask: one of my cave dwellers I recently pulled out.

grs · 08-21-2012, 05:14 PM

Quote:

Originally Posted by mopar346

Sorry for a brief highjack - we were talking about jacks right?

GRS, That is a Merc emblem in the center of your tire. Does it mean anything?

The reason I ask: one of my cave dwellers I recently pulled out.

I never had a Merc. with those hubcaps. I bought the cap about 20 years ago. It fit so I used it. I think it looks cool.

mopar346 · 08-21-2012, 05:29 PM

I think the Merc head is pretty cool as well, besides just another reason to post some of my junk.

flamingbig10 · 08-21-2012, 08:36 PM

I had flat on my truck a couple weeks ago on the front, ran over something on a rail road track and drug the arm a goods ways this was on flat road destroyed the control arm,

mongoose · 08-21-2012, 08:46 PM

lo-pro's = scrub line king!

08-20-2012, 06:40 PM	#1
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Two jacks to fix a flat. My truck is lowered. I could not get a jack under the front to change a flat. I bought a very small hydraulic jack. I use it under the frame at the very front of the truck. I raise the truck so the control arm raises up enough to get my big scissor jack under it. Then up it goes.

08-20-2012, 06:49 PM	#2
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Two jacks to fix a flat. Same with mine or I drive over something like a brick or a couple peices of wood. Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

08-20-2012, 06:51 PM	#3
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: Two jacks to fix a flat. LOL I know what you mean, I actually play musical Jacks to get my truck up! __________________ Matt

08-20-2012, 07:42 PM	#4
HTX86chevy Registered User Join Date: Feb 2010 Location: Houston, Tx Posts: 349	Re: Two jacks to fix a flat. I don't have this problem yet since I haven't gotten around to dropping my truck. This is good info though.... Just curious, do you think the low profile Jacks from HF would fit under ? I have on and use it all the time . It works great but I use it on my stock height 86, stock height 01 and Lifted 08 Jeep Patriot. __________________

08-20-2012, 08:56 PM	#5
mopar346 Registered User Join Date: Jan 2011 Location: Quincy, FL Posts: 533	Re: Two jacks to fix a flat. Ruined a perfectly good truck. Attached Images

08-20-2012, 09:25 PM	#6
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Two jacks to fix a flat. Also watch how sewer drains become your headers and a arms worst nightmare with a flat tire lol Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

08-20-2012, 09:47 PM	#7
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: Two jacks to fix a flat. If you keep the stock/factory jack in the truck, it still works with a lowered truck. For the front it has a low slung hook that fits the front of the lower control arms and for the rear it still fits under the axle tube. You can also use a scissor jack like a lot of late model cars have that doesnt take up much space. __________________ John 82 Chevy Silverado 350ci/TH350

08-21-2012, 07:16 AM	#12
mopar346 Registered User Join Date: Jan 2011 Location: Quincy, FL Posts: 533	Re: Two jacks to fix a flat. Kinda like the kids with their pants hanging off the butts. Just busting on the "lowered" class. Not my thing, but I appreciate anything done well, except maybe 4 door sedans, wagons I get.

08-21-2012, 07:30 AM	#13
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Two jacks to fix a flat. I bought an aluminum lower jack. I think it's only 3" high at the lift point. It barely fits under the a-arm! Works great. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

08-21-2012, 10:37 AM	#14
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,257	Re: Two jacks to fix a flat. Who carries a spare? My exhaust runs thru that area. Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

08-21-2012, 10:55 AM	#16
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Two jacks to fix a flat. I carry a spare in the bed with a floor jack. They are tied together with a chain. So far, no one has stole them. I also cover them with a blanket. I could go without a spare. As long as I'm in the city limits, I can get a tow. My insurance will send me back $75. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

08-21-2012, 12:25 PM	#18
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: Two jacks to fix a flat. I bought a low profile racing jack for my dropped s10 and haven't had any problems with it. __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

08-21-2012, 03:16 PM	#19
mopar346 Registered User Join Date: Jan 2011 Location: Quincy, FL Posts: 533	Re: Two jacks to fix a flat. Sorry for a brief highjack - we were talking about jacks right? GRS, That is a Merc emblem in the center of your tire. Does it mean anything? The reason I ask: one of my cave dwellers I recently pulled out. Attached Images

08-21-2012, 05:29 PM	#21
mopar346 Registered User Join Date: Jan 2011 Location: Quincy, FL Posts: 533	Re: Two jacks to fix a flat. I think the Merc head is pretty cool as well, besides just another reason to post some of my junk.

08-21-2012, 08:36 PM	#22
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Two jacks to fix a flat. I had flat on my truck a couple weeks ago on the front, ran over something on a rail road track and drug the arm a goods ways this was on flat road destroyed the control arm, __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326



Register or Log In To remove these advertisements.

08-21-2012, 08:46 PM	#23
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: Two jacks to fix a flat. lo-pro's = scrub line king! __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.