IN Chrome GMC Horn Button

[Todd68Chevy]

I am not sure what years this fits but it looks good for its age. Has a pit above the "M" in GMC. Some other very small pits starting. Tried to picture but chome is hard to get pictures of. Rubber is soft and no cracks seen. Please ask any questions. Post to the thread before PM. $25.00 shipped to the cont. U.S., $20.00 plus shipping anywhere else. Thanks for looking.

[Todd68Chevy]

A few more pictures.

[1275gtsport]

can you Measure across the rubber part and the total width as well for me? If it is wide enough I would be interested in it for my 1977 GMC motorhome (I know its not a truck) I used to own a 66 step side. It was almost in "the children of lesser dreams" but they decided to go with a 65 chevy instead

[Todd68Chevy]

I am measuring the rubber is approx. 2 1/4". The top of the chrome is approx. 2 3/4" and the bottom of the chrome is approx. 2 7/8". Let me know if you need anything else. Thanks

[1275gtsport]

bummer the rubber part is too big and the chrome part is too small. the wheel center is just over 2 and an 1/8 and the outside of the button has to be at least 3 inches to cover the screws.

[Todd68Chevy]

TTT this horn cap is still available.

Originally Posted by 1275gtsport

bummer the rubber part is too big and the chrome part is too small. the wheel center is just over 2 and an 1/8 and the outside of the button has to be at least 3 inches to cover the screws.

1275gtsport, I do have this horn cap from a 67 or 68 that measures approx. 3 3/4" across the top, 2 1/4" across the bottom of the rubber and 2" across the bottom metal ring that the rubber attaches to. $20.00 plus shipping if interested. I believe you could also just change the entire steering wheel if you want for it to look different. If the column is GM, I think all GM columns use the same spline from the early 60's to the mid 90's. I have a 88-94 Chevy truck steering wheel on my 68 and my dad has one on his 62 Impala.