KS metal clutch deletes also a couple plastic ones - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-06-2012, 12:37 PM

$11 shipped each money order only

longhorn70gmc · 10-08-2012, 02:30 PM

Hello Randy,
In the engine bay of my GMC Longhorn right off of the driver side valve cover I have a 2 inch diameter type hole. I have a used gasket type tubular assembly for it like the one on my Chevy Longhorn I have with Manual Transmission, but the GMC is a automatic. Does this cover go to this area or spot? I do not see any screw holes on my GMC around the hole, but that can be fixed. I have been looking for what covers this up for a very longtime. Let me know?
R/
Billy

teeitup · 10-09-2012, 06:37 PM

Billy, yours probably came with a plastic one, some of the early ones did. The spot your talking about sounds like the clutch rod hole. Thanks Randy

longhorn70gmc · 10-10-2012, 07:24 PM

Thanks Randy for always helping me out, I appreciate my Board Brother!!!! Another gentleman selling the plastic ones has contacted me and I will get one. As always GOOD LUCK on all of your sales, till next time.
R/
Billy

mahanian · 10-10-2012, 09:42 PM

Hey Billy,
Sounds like Randy has some of the plastic ones too, I thought he just had the metal ones in the picture. I would never try and step in on a sale so I would prefer if you work out a deal with him

Posted via Mobile Device

longhorn70gmc · 10-11-2012, 06:23 PM

Hello Randy, MAHANIAN,
I am sorry I miss understood, did you have some plastic ones available Randy? Sure I would love to get one from you if so. This goes to show even as much as I have worked on these things, I did not know what goes in that Clutch hole.
Thanks to the other gentleman (MAHANIAN) for helping out. You both are good people on here. I can buy one from both of you, it is no problem.
R/
Billy

teeitup · 10-11-2012, 08:40 PM

Hey guys, no worries here. I do have one plastic one and maybe a couple others out there. They are used though. Whatever you decide is fine Billy, your always on my good list

. Thanks Jared for being so up front about the whole deal.

**Ironhorse** · 10-11-2012, 10:11 PM

Hey Randy, Looks like you have quite the pile of clutch delete plates there !
I bought one off the board last year and now that I am in the process of changing over from sm465/np205 to a 350TH/np205 do you think I can find my "stashed it for later use" hidey hole ?

If I don't find it by this week-end put me down for a metal one for sure. Doubt that you need anything with as many trucks as you part but I sure do like "hoss tradin" if and when at all possible. Let me know, Gary B.

teeitup · 10-13-2012, 10:32 AM

Sure Gary we will work something out

**Ironhorse** · 10-14-2012, 10:17 AM

Randy, finally found the clutch delete I was looking for. Boy, do I need to get my stuff organized, really like the way you have your "stuff" shelved and seperated as you do. I'm jealous,

longhorn70gmc · 10-18-2012, 06:21 PM

Can I get one of your plastic ones Randy?

longhorn70gmc · 10-22-2012, 07:18 PM

Hi Randy,
How much do I need to send you for a cover shipped? Thanks
R/
Billy

teeitup · 10-22-2012, 07:19 PM

$12 Billy, Thanks Randy

longhorn70gmc · 10-23-2012, 01:49 PM

Good deal Randy, I am on it.
R/
Billy

fine 67 · 10-23-2012, 02:55 PM

hi randy .when you get a chance could you check to see if you have these.please shot me aprice plus shipping 14580 zip thanks mark 2) headlamp retainer rings plus screws 1) rear body light harness p/u 1) defoster outlet rightside 2) a/c outlet bezal and ball holder 2) best you got wiper arms 2) large phillips head screws that hold the dimmer switch 2) upper radiator hold down standerd duty

teeitup · 10-23-2012, 06:26 PM

Sounds good Billy

Mark, I have headlight rings. Sorry no taillight harnesses right now. I have defrost vents. What side ac outlet and ball holder? I have alot of wipers. I'll have to look on dimmer switch screws. I have a pair of upper rad holddowns. Let me know of stuff I asked questions about and I'll get pics

Thanks Randy

fine 67 · 10-24-2012, 09:04 AM

hi randy , i need both sides for the a/c pieces plus a price thanks mark

longhorn70gmc · 10-24-2012, 06:24 PM

Hello Randy,
The MO is on its way!
R/
Billy

teeitup · 11-02-2012, 07:49 PM

fine 67, Mark, sorry for delay, here are pics of stuff if your still needing parts

longhorn70gmc · 11-13-2012, 08:05 PM

Quote:

Originally Posted by longhorn70gmc

Hello Randy,
The MO is on its way!
R/
Billy

Hello Randy,
I recieved the part and it looks great, as always thanks for hookin up a board brother. I apoligize for the late reply, I have been in NM for two weeks. Food for thought, if you come across a smaller frame bar that mounts with two bolts, one each side that is installed right above the spare tire on the outside of the frame, let me know, I need one, mine is severly bent and welded on. Till next time my friend.
R/
Billy

**425HP409** · 11-14-2012, 01:04 AM

I will take a metal one
Posted via Mobile Device

teeitup · 03-16-2013, 05:18 PM

I still have alot of these

calvin78612 · 03-17-2013, 08:26 AM

Randy,put me down for a metal one please,Calvin.

teeitup · 03-17-2013, 11:14 AM

OK Calvin, I will pm you tonight. Thanks Randy

teeitup · 03-27-2013, 08:34 PM

Calvin, mailing it out Thurs, Thanks so much, Randy

10-06-2012, 12:37 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	metal clutch deletes also a couple plastic ones $11 shipped each money order only Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-23-2013 at 08:41 AM.

10-08-2012, 02:30 PM	#2
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: metal clutch deletes also a couple plastic ones Hello Randy, In the engine bay of my GMC Longhorn right off of the driver side valve cover I have a 2 inch diameter type hole. I have a used gasket type tubular assembly for it like the one on my Chevy Longhorn I have with Manual Transmission, but the GMC is a automatic. Does this cover go to this area or spot? I do not see any screw holes on my GMC around the hole, but that can be fixed. I have been looking for what covers this up for a very longtime. Let me know? R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

10-09-2012, 06:37 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones Billy, yours probably came with a plastic one, some of the early ones did. The spot your talking about sounds like the clutch rod hole. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-10-2012, 07:24 PM	#4
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: metal clutch deletes also a couple plastic ones Thanks Randy for always helping me out, I appreciate my Board Brother!!!! Another gentleman selling the plastic ones has contacted me and I will get one. As always GOOD LUCK on all of your sales, till next time. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

10-10-2012, 09:42 PM	#5
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: metal clutch deletes also a couple plastic ones Hey Billy, Sounds like Randy has some of the plastic ones too, I thought he just had the metal ones in the picture. I would never try and step in on a sale so I would prefer if you work out a deal with him Posted via Mobile Device __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

10-11-2012, 06:23 PM	#6
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: metal clutch deletes also a couple plastic ones Hello Randy, MAHANIAN, I am sorry I miss understood, did you have some plastic ones available Randy? Sure I would love to get one from you if so. This goes to show even as much as I have worked on these things, I did not know what goes in that Clutch hole. Thanks to the other gentleman (MAHANIAN) for helping out. You both are good people on here. I can buy one from both of you, it is no problem. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

10-11-2012, 08:40 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones Hey guys, no worries here. I do have one plastic one and maybe a couple others out there. They are used though. Whatever you decide is fine Billy, your always on my good list. Thanks Jared for being so up front about the whole deal. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-11-2012, 10:11 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,301	Re: metal clutch deletes also a couple plastic ones Hey Randy, Looks like you have quite the pile of clutch delete plates there ! I bought one off the board last year and now that I am in the process of changing over from sm465/np205 to a 350TH/np205 do you think I can find my "stashed it for later use" hidey hole ? If I don't find it by this week-end put me down for a metal one for sure. Doubt that you need anything with as many trucks as you part but I sure do like "hoss tradin" if and when at all possible. Let me know, Gary B. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-13-2012, 10:32 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones Sure Gary we will work something out __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-14-2012, 10:17 AM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,301	Re: metal clutch deletes also a couple plastic ones Randy, finally found the clutch delete I was looking for. Boy, do I need to get my stuff organized, really like the way you have your "stuff" shelved and seperated as you do. I'm jealous, __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-18-2012, 06:21 PM	#11
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: metal clutch deletes also a couple plastic ones Can I get one of your plastic ones Randy? __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

10-22-2012, 07:18 PM	#12
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: metal clutch deletes also a couple plastic ones Hi Randy, How much do I need to send you for a cover shipped? Thanks R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

10-22-2012, 07:19 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones $12 Billy, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-23-2012, 01:49 PM	#14
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: metal clutch deletes also a couple plastic ones Good deal Randy, I am on it. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

10-23-2012, 02:55 PM	#15
fine 67 Junior Member Join Date: Jun 2001 Location: webster,n.y.,usa Posts: 127	Re: metal clutch deletes also a couple plastic ones hi randy .when you get a chance could you check to see if you have these.please shot me aprice plus shipping 14580 zip thanks mark 2) headlamp retainer rings plus screws 1) rear body light harness p/u 1) defoster outlet rightside 2) a/c outlet bezal and ball holder 2) best you got wiper arms 2) large phillips head screws that hold the dimmer switch 2) upper radiator hold down standerd duty



Register or Log In To remove these advertisements.

10-23-2012, 06:26 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones Sounds good Billy Mark, I have headlight rings. Sorry no taillight harnesses right now. I have defrost vents. What side ac outlet and ball holder? I have alot of wipers. I'll have to look on dimmer switch screws. I have a pair of upper rad holddowns. Let me know of stuff I asked questions about and I'll get pics Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-24-2012, 09:04 AM	#17
fine 67 Junior Member Join Date: Jun 2001 Location: webster,n.y.,usa Posts: 127	Re: metal clutch deletes also a couple plastic ones hi randy , i need both sides for the a/c pieces plus a price thanks mark

10-24-2012, 06:24 PM	#18
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: metal clutch deletes also a couple plastic ones Hello Randy, The MO is on its way! R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

11-02-2012, 07:49 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones fine 67, Mark, sorry for delay, here are pics of stuff if your still needing parts Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-14-2012, 01:04 AM	#21
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: metal clutch deletes also a couple plastic ones I will take a metal one Posted via Mobile Device __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

03-16-2013, 05:18 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones I still have alot of these __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-17-2013, 08:26 AM	#23
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 804	Re: metal clutch deletes also a couple plastic ones Randy,put me down for a metal one please,Calvin. __________________ 84 step side 87 swb

03-17-2013, 11:14 AM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones OK Calvin, I will pm you tonight. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-27-2013, 08:34 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: metal clutch deletes also a couple plastic ones Calvin, mailing it out Thurs, Thanks so much, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.