Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmdrone · 11-25-2012, 04:51 PM

I have a 60 panel with a 64 283. The only headers I see are 66 and up will these fit in mine Thanks Dan

luvbowties · 11-25-2012, 08:21 PM

Quote:

Originally Posted by dmdrone

I have a 60 panel with a 64 283. The only headers I see are 66 and up will these fit in mine Thanks Dan

You have several choices here:>> http://www.summitracing.com/search/d...del/c10-pickup <<. Check other sites, Jegs, Advance A/P, O'Reilly's etc. who may also have them.
sam

ChuckW · 11-26-2012, 01:27 PM

Yes they should fit.. All the same under the hood... I used Headman Elite. I do still need to relocate the brake line over the crossmember as the line is uber close to the L/H header tubes. Other then that perfect fit.

11-25-2012, 04:51 PM	#1
dmdrone Registered User Join Date: Aug 2012 Location: Roanoke Texas Posts: 10	Headers I have a 60 panel with a 64 283. The only headers I see are 66 and up will these fit in mine Thanks Dan

11-26-2012, 01:27 PM	#3
ChuckW Registered User Join Date: Mar 2011 Location: Alameda, CA. Posts: 173	Re: Headers Yes they should fit.. All the same under the hood... I used Headman Elite. I do still need to relocate the brake line over the crossmember as the line is uber close to the L/H header tubes. Other then that perfect fit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.