Need help with pump to carb fuel line

[verona33]

I have an aftermarket mech fuel pump. I have an edelbrock carb that has that nipple on the rear of the carb. Do i just run all rubber line to a filter then from filter to the vaccum lookong nipple for fuel? I wanted to hardline it but if its rubber then thats easier huh? And what kind of filter can i use?
Posted via Mobile Device

[verona33]

anyone?
Posted via Mobile Device

[frog210]

Any pictures, i thought all eddys had it for ahard line screw in and out

[C-10 simplex]

mmmmmm......i would prefer metal line---it's not that hard to make.

But i'm wondering everyone thoughts on using braided line?

[THE "10" SILVERADO]

I read somewhere that you shouldn't have more than a foot of rubber line in a fuel system. I just used the standard metal pump to carb line that came on mine and cut the end off so I could run an 8" rubber line with an inline filter to the nipple at the back of my eddlebrock.

I think you can see a little of it in the picture.

[verona33]

Thanks10 that really seems the route to go because yes, frog, you can unscrew the fuel inlet which looks like a vaccum line really but ive heard its easy to damage and my line and pump are 3/8. Fuel port is 5/8 im told.
Posted via Mobile Device

[ont_guy_38]

http://www.summitracing.com/parts/edl-8125

Easy and safe way right here...