|
|
|
12-22-2012, 05:04 PM
|
#1 |
|
Registered User
 Join Date: Aug 2012
Location: Saginaw Texas
Posts: 290
|
Neutral safety switch
I'm wiring my truck and get to he part about neutral safety switch and there is not one on my column it's 1972 350 automatic. Any ideas? I'm lost.
Posted via Mobile Device |
|
|
|
12-22-2012, 06:25 PM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Fall River California
Posts: 2,027
|
Re: Neutral safety switch
Did you look on top of the column near the firewall? If its not there someone may have removed it. Has the column been shortened, pushed through the firewall? If so it may be in the engine compartment near the firewall. You can still get a new one from LMC, Classic Parts, etc
Posted via Mobile Device
__________________
http://smg.photobucket.com/albums/v655/aaronhero/ |
|
|
|
|
12-22-2012, 07:47 PM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Neutral safety switch
if the truck was originally a manual tranny truck they did not have neutral safty switches
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
12-22-2012, 07:58 PM
|
#4 | |
|
2WD Jimmy
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
|
Re: Neutral safety switch
Quote:
Posted via Mobile Device |
|
|
|
|
|
12-22-2012, 08:21 PM
|
#5 | |
|
20' Daredevil (Ret)
Join Date: May 2003
Location: Jefferson State
Posts: 13,732
|
Re: Neutral safety switch
Quote:
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
|
|
|
|
12-22-2012, 08:22 PM
|
#6 |
|
Cluster King
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
|
Re: Neutral safety switch
The neutral safety switch for your 72 should look close to the photo I attached. There should also be a thin rod that slides into it from higher up the column. Like others mentioned, it should be mounted inside the cab, low on the steering column. The rod moves and tells the switch what position the shift selector is in and will not supply power to the starter from the ignition switch when the selector is not in park or neutral.
The wires for the neutral safety side of the switch will be purple. The switch also provides power to the back up lights. Hope this helps. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
