|
06-09-2003, 01:17 AM
|
#1 |
|
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
removing a/c sutff
well i wanna remove my firewall a/c crap when i pull the motor but i was just lookin at it and its attached to the blower cover so how do i go about doing this? do i ned to get a blower motor cover from a non a/c truck or something?
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
|
|
|
06-09-2003, 08:39 AM
|
#2 |
|
Registered User
Join Date: Jun 2002
Location: DFW, TX
Posts: 1,680
|
I think if you're wanting to strip your AC out, you'll have to get a blower motor from a non-a/c truck and you'll also have to weld up a hole to the right of that. I think some of the guys (CaptKaos and bigblock73) have done this and should be able to help.
__________________
Scott Shelbourne |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
