Steering column question

[hamad]

Hello

Is there such a column for a manual transmission which has cruise + tilt + adjustable wipers ?

My truck was an auto and swapped it out for a manual, so now i have 2 shifters

any ideas ?

[thesickc10]

just pull the pin out and take the shifter off

[hamad]

Originally Posted by thesickc10

just pull the pin out and take the shifter off

but it wont look nice, the piece the holds the shifter in place will still be visible

[INSIDIOUS '86]

I did this to mine. Any truck that came factory with a manual will have the right column. Just need to find your year truck that was factory manual. But you can see where it gets hard because statistically there are a lot less of that variant made as well as they were used a little more for utility and heavy duty and when they reached the end of thier life they were scrapped or parted. So you see that that makes that just that much harder to do.
Posted via Mobile Device

[hatzie]

Cut the stub off the collar, patch with Lab Metal or your choice of epoxy, file/sand smooth and paint.

[Dylan86]

I did the same thing, except i went with a ratchet shift/auto setup. i took the old column, cut the nub off and filled the area. cant even tell now....