Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-03-2013, 10:07 PM | #1 |
Registered User
Join Date: Sep 2012
Location: Graham, WA
Posts: 136
|
Please help me identify my I6!
Ok, my apologies in advance because this has probably been covered here a million times over. I just can't seem to figure out anything other than it's a 230-250 out of a 64-76 Chevy/Olds. The engine is currently in my 63 C10 long bed.
Here's the casing number: 3921968 Here's the numbers on the pad near the distributor: F0527CCG 2 L527678 Here's the numbers back by the starter: CON2 E260 I'm hoping I put O's where they are supposed to be and zero's where they are supposed to be. Any help is much appreciated! |
03-04-2013, 09:58 AM | #2 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: Please help me identify my I6!
Would have come off foundry conveyer 2 built in May 26, 1970 (E260). Can you get a number off the head? Might help narow it down some. My guess is being built that late its probably a 250. My numbers show 64-76 chevy/old 230/250, which you already knew.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
03-04-2013, 05:25 PM | #3 |
Registered User
Join Date: Sep 2010
Location: Tulsa, Oklahoma
Posts: 1,925
|
Re: Please help me identify my I6!
JOLLYS GMC WEBSITE SHOWS PICTURES BETWEEN THE I6 ENGINES, CANNOT FIND THE LINK TO THAT SITE BUT WILL ADVISE WHEN I FIND IT. KIETH
|
03-04-2013, 06:00 PM | #4 |
Registered User
Join Date: Jul 2005
Location: " The Scenic City "
Posts: 189
|
Re: Please help me identify my I6!
Jolly's all inclusive website - http://www.chevytalk.org/fusionbb/sh...hp?tid/187290/
__________________
" The lesson is in the struggle , not in the victory " |
03-05-2013, 11:49 AM | #5 |
Registered User
Join Date: Sep 2010
Location: Tulsa, Oklahoma
Posts: 1,925
|
Re: Please help me identify my I6!
Guess I was wrong, no differences showed up from the 230 to the 250......thanks for finding Jolly website though...Kieth
|
03-05-2013, 10:08 PM | #6 |
Registered User
Join Date: Sep 2012
Location: Graham, WA
Posts: 136
|
Re: Please help me identify my I6!
Thanks everyone. I appreciate the responses and research! Based on the fuel pump that was on it when I bought it, I'm going with a 250 for now. 1963 C-10, I agree that it's probably a 250 and I will take down the numbers off of the head the next time I have the valve cover off.
|
03-05-2013, 10:33 PM | #7 | |
Registered User
Join Date: May 2009
Location: Rathdrum, Idaho
Posts: 1,135
|
Re: Please help me identify my I6!
Quote:
http://www.6066gmcguy.org/Inline6.htm |
|
03-06-2013, 01:10 AM | #8 |
Registered User
Join Date: Feb 2010
Location: Walnut Grove, Ca
Posts: 216
|
Re: Please help me identify my I6!
I have a picture in my build thread of a known 250. Well bored over now its more like a 252 ;p
My understanding was the only way to tell was physically measure the bore, or was it stroke??? Either way I think physically they are the same motor. Oh btw, new to this side, I was just a 69-72 guy, but rescently picked up a 3/4 ton, 66 GMC.. Long step.
__________________
66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED!:devil 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926 |
03-06-2013, 02:30 AM | #9 |
Registered User
Join Date: May 2009
Location: Rathdrum, Idaho
Posts: 1,135
|
Re: Please help me identify my I6!
Well that's what I thought also, but check the pictures on Jolly's site see if you see a difference there between the 2 motors illistraighted...Vernski
ttp://www.6066gmcguy.org/Inline6.htm |
03-06-2013, 11:37 AM | #10 | |
Registered User
Join Date: Apr 2012
Location: Wisconsin
Posts: 3,329
|
Re: Please help me identify my I6!
Quote:
__________________
IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK |
|
03-06-2013, 12:43 PM | #11 | |
Registered User
Join Date: Sep 2010
Location: Tulsa, Oklahoma
Posts: 1,925
|
Re: Please help me identify my I6!
Quote:
Vernsky, get the bifocals out you were comparing a 250 to a 292, I could see no difference in the 230 vs 250 ha ha Kieth |
|
03-06-2013, 10:39 PM | #12 | |
Registered User
Join Date: Sep 2012
Location: Graham, WA
Posts: 136
|
Re: Please help me identify my I6!
Quote:
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|