Stripping down my cab floor... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fastnloud · 03-25-2013, 08:38 PM

I started stipping down my cab floor today. I'm going to paint it with some Hammerite Rust Cap.

I'm planning on just painting the floor, and then putting in one of those 1 piece rubber floor mats that go all the way across.

As far as sound deadener, I was thinking put some peel and seel/dynamat type stuff on the bottoms of the mat itself, and also on the cab floor under where the seat bolts down. Should that be enough?

Also, I've took some pics of things I had questions about.

Does anyone know what this wire is?

Also, what are these things that are on the floor under the seat area?

Thanks guys.

Billy81 · 03-25-2013, 11:39 PM

I think that wire goes to the seat belt warning buzzer and that other pic is a plug.

Keith Seymore · 03-26-2013, 07:25 AM

Check out site vendor CaptKaos for the vinyl flooring. I would not recommend LMC for that.

K

Shyguy · 03-26-2013, 09:48 AM

I bought a rubber mat from LMC for my '67 and it was of poor quality.

fastnloud · 03-26-2013, 08:48 PM

Thanks guys for the feedback. I'm not going to be putting in a full vinyl floor, I'm just putting in a 1 piece rubber mat that will cover all the main areas.

03-25-2013, 08:38 PM	#1
fastnloud Registered User Join Date: Dec 2012 Location: USA Posts: 209	Stripping down my cab floor... I started stipping down my cab floor today. I'm going to paint it with some Hammerite Rust Cap. I'm planning on just painting the floor, and then putting in one of those 1 piece rubber floor mats that go all the way across. As far as sound deadener, I was thinking put some peel and seel/dynamat type stuff on the bottoms of the mat itself, and also on the cab floor under where the seat bolts down. Should that be enough? Also, I've took some pics of things I had questions about. Does anyone know what this wire is? Also, what are these things that are on the floor under the seat area? Thanks guys.

03-25-2013, 11:39 PM	#2
Billy81 Registered User Join Date: Jun 2004 Location: Medford,Oregon Posts: 390	Re: Stripping down my cab floor... I think that wire goes to the seat belt warning buzzer and that other pic is a plug. __________________

03-26-2013, 07:25 AM	#3
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,226	Re: Stripping down my cab floor... Check out site vendor CaptKaos for the vinyl flooring. I would not recommend LMC for that. K __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

03-26-2013, 09:48 AM	#4
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: Stripping down my cab floor... I bought a rubber mat from LMC for my '67 and it was of poor quality. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

03-26-2013, 08:48 PM	#5
fastnloud Registered User Join Date: Dec 2012 Location: USA Posts: 209	Re: Stripping down my cab floor... Thanks guys for the feedback. I'm not going to be putting in a full vinyl floor, I'm just putting in a 1 piece rubber mat that will cover all the main areas.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.