Need help finding wheels! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69GMC910 · 04-02-2013, 12:03 AM

I need to find some 15x10 5x5 4.5/5" BS rear wheels and some 15x4 or 15x5 5x5 front wheels. I havent had much luck other than seeing some Weld Rod Lites which I'm not a huge fan of... Can somebody point me in the right direction! I need the wheels to get my slicks on before mid May! Prefer aluminum, weight is an issue!

Thank you!
Posted via Mobile Device

redsled87 · 04-03-2013, 11:24 AM

Centerline convo pros have a 5 on 5 pattern with a 5 " backspacing on a 15x10. They alson offer a 4 and 6 wheel for the front. You could also redrill your axles on drums for the car paatern too. Depending what spindles you have, you can use Camaro rotors on the front.
Posted via Mobile Device

funnyfarmracer · 04-04-2013, 05:22 PM

Rocket wheels from speedway has a few to choose from.

69GMC910 · 04-04-2013, 08:52 PM

Thanks guys... What do you think of 5 spoke wheels being used on the rear for drag racing? Safe?

04-02-2013, 12:03 AM	#1
69GMC910 MOTORHEAD! Join Date: May 2000 Location: Devon AB, Canada Posts: 849	Need help finding wheels! I need to find some 15x10 5x5 4.5/5" BS rear wheels and some 15x4 or 15x5 5x5 front wheels. I havent had much luck other than seeing some Weld Rod Lites which I'm not a huge fan of... Can somebody point me in the right direction! I need the wheels to get my slicks on before mid May! Prefer aluminum, weight is an issue! Thank you! Posted via Mobile Device __________________ 82 GMC High Sierra VortecPro 496 12 Bolt, 3.42's AFR 265 Holley 850 Performer RPM Air Gap Hooker 2455's TCI Turbo 400 Super Street Fighter TRRC 12 Bolt Eaton Posi Mark Williams Axles Cal-Tracs Hoosier 30x10.5 Radial Slick Full weight long box pickup Current best- 11.33@117mph

04-03-2013, 11:24 AM	#2
redsled87 Registered User Join Date: Dec 2011 Location: Lanc Co PA Posts: 226	Re: Need help finding wheels! Centerline convo pros have a 5 on 5 pattern with a 5 " backspacing on a 15x10. They alson offer a 4 and 6 wheel for the front. You could also redrill your axles on drums for the car paatern too. Depending what spindles you have, you can use Camaro rotors on the front. Posted via Mobile Device __________________ 1987 R10 Pump Gas 496/TH375 Best 1/4 pass to date 60' 1.49 1/4 10.93 MPH 120

04-04-2013, 05:22 PM	#3
funnyfarmracer Registered User Join Date: Jun 2008 Location: porter texas Posts: 57	Re: Need help finding wheels! Rocket wheels from speedway has a few to choose from.

04-04-2013, 08:52 PM	#4
69GMC910 MOTORHEAD! Join Date: May 2000 Location: Devon AB, Canada Posts: 849	Re: Need help finding wheels! Thanks guys... What do you think of 5 spoke wheels being used on the rear for drag racing? Safe? __________________ 82 GMC High Sierra VortecPro 496 12 Bolt, 3.42's AFR 265 Holley 850 Performer RPM Air Gap Hooker 2455's TCI Turbo 400 Super Street Fighter TRRC 12 Bolt Eaton Posi Mark Williams Axles Cal-Tracs Hoosier 30x10.5 Radial Slick Full weight long box pickup Current best- 11.33@117mph

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.