|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-16-2013, 03:38 PM
|
#1 |
|
Registered User
Join Date: Nov 2012
Location: Kingsburg CA
Posts: 581
|
Door seal installation
Hey guys,
I was reading another post from a fellow 60-66 reader about door weatherstipping. I just tore mine out because the previous owner made a complete mess trying to install them. Adhesive was all over the place. What's the best way to put these on? I was thinking of running a bead deep in the stripping, then sliding them on and holding them on with 2" tape until the adhesive sets up. Anyone have a better way? I'm going to be painting the entire cab and jambs in the next couple of weeks and want to minimize any messes I can! 
__________________
My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=705185 How to Get Audiophile Sound in 60-66 Trucks http://67-72chevytrucks.com/vboard/s...=1#post7236896 Building Your Own Speaker Kick Pods http://http://67-72chevytrucks.com/vboard/showthread.php?t=730495 |
|
|
|
04-16-2013, 05:52 PM
|
#2 |
|
Registered User
Join Date: Apr 2012
Location: Las Vegas, NV
Posts: 80
|
Re: Door seal installation
That's exactly what I did with mine, I think getting a quality adhesive was the key though. I used 3M weatherstrip adhesive on mine.
__________________
65 C20 Fleetside longbed, 350, turbo 400, 8-lug disc brakes, power steering, air conditioning - Totaled by a guy running a red light. Pulling parts off the carcass for my next truck |
|
|
|
|
04-16-2013, 05:56 PM
|
#3 |
|
Registered User
Join Date: Feb 2011
Location: Williams, CA
Posts: 760
|
Re: Door seal installation
If you use 3M weatherstripping adhesive, you need to lightly coat both parts, let them sit for a few to get tacky, then press them together. I found out that those $0.10 each acid brushes from a hardware store work pretty well. Use one for a few minutes, then chuck it and grab a new one.
Also, Keep some lacquer thinner handy, in case you get strings. Good Luck! Jeff
__________________
Jeff 96 C3500 Crew Cab Long bed (Waiting on Cool Name) 64 C-10 shortie stepside, "Ole Brownie" C-10 Club My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345 |
|
|
|
|
04-16-2013, 07:37 PM
|
#4 | |
|
Registered User
Join Date: Feb 2009
Location: southeasternfoothillsofusa
Posts: 1,557
|
Re: Door seal installation
Quote:
Having so many thumbs  on my hands, I need to use the earlier technique to enable adjustable-shifting after making initial contact with the 2 surfaces. BTW: This method--"running a bead deep in the stripping, then sliding them on and holding them on with 2" tape until the adhesive sets up"--works long-term also!Sam Last edited by luvbowties; 04-16-2013 at 07:40 PM. Reason: add'l info |
|
|
|
|
|
04-16-2013, 07:56 PM
|
#5 |
|
Registered User
Join Date: Feb 2011
Location: Williams, CA
Posts: 760
|
Re: Door seal installation
Thanks luvbowties,
That's a very important note I forgot to mention.
__________________
Jeff 96 C3500 Crew Cab Long bed (Waiting on Cool Name) 64 C-10 shortie stepside, "Ole Brownie" C-10 Club My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345 |
|
|
|
|
04-16-2013, 08:57 PM
|
#6 |
|
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,901
|
Re: Door seal installation
Use a scuff pad on the flange to make sure the glue has a good surface to bite into since you'll have fresh paint.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
