|
04-26-2013, 10:15 PM
|
#1 |
|
Registered User
Join Date: Apr 2013
Location: Palmdale, CA.
Posts: 13
|
60-62 Motor Mounts
Hey all.. I have some torn up motor towers they previous owner rigged up. I was looking for ideas/ kits / or anything that is better than what I have. I'm dropping in a SB 383. Help Please.
|
|
|
|
04-26-2013, 11:41 PM
|
#2 |
|
Registered User
Join Date: Apr 2013
Location: Palmdale, CA.
Posts: 13
|
Re: 60-62 Motor Mounts
best shot I have of the hacked towers.
|
|
|
|
|
04-29-2013, 07:18 AM
|
#3 |
|
Registered User
Join Date: Apr 2011
Location: MV Ma.
Posts: 114
|
Re: 60-62 Motor Mounts
I'm using a Speedway weld/bolt in tubeular crossmember motor mount, the also sell the sb mounts that bolt up.poly or rubber available on the mounts.
Putting mine in this week along with the transmission. Posted via Mobile Device |
|
|
|
|
04-30-2013, 12:15 PM
|
#4 |
|
Registered User
Join Date: Apr 2013
Location: Palmdale, CA.
Posts: 13
|
Re: 60-62 Motor Mounts
Let me know how it goes Blue. Pics would be nice and thanks for the input. That tubular one was what I was looking for.I found a few of them but nothing that would clear our narrow frames. I am not sure if I have the 5.5 inch clearance down low. I am going to do some measuring tonight. Hope yours goes well.
|
|
|
|
|
04-30-2013, 12:20 PM
|
#5 |
|
Registered User
Join Date: Apr 2013
Location: Palmdale, CA.
Posts: 13
|
Re: 60-62 Motor Mounts
Also, What headers/manifolds you using? Just looking ahead at clearance. The reason they were hacked in the 1st place was because the manifolds couldn’t clear the towers.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
