Any suggestions?? Steering box issue... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BK'66Step · 05-28-2013, 04:20 PM

So as I was taking apart the front end and getting the frame prepped for paint, I took off the steering box and stumbled upon this... The rear-most bolt hole in the frame has been completely sheared out!! Not really sure what the best course of action would be at this point. I plan on putting in power steering but I'm not sure if that requires a special bracket that would require different hole locations. I thought about just hammering it flush and welding it the hole shut and then drilling a new hole, but I'm not sure that would be strong enough for the application... any insight would be much appreciated!! :-)

chevyrestoguy · 05-28-2013, 04:46 PM

I would stop-drill the crack and re-weld it. After that, I would convert the truck to power steering, and use one of Capt Fab's adaptor brackets and have it fully welded in. You'll be good to go after that.

billd5string · 05-28-2013, 04:48 PM

I'd hammer it back, weld it up, and then get the adaptor plate from Captain Fab for a power steering box. Any power steering conversion requires new holes anyway, and you can weld the adaptor plate right onto the frame.

I just got done updating mine to power steering, and the plate and instructions from Captain were excellent - I highly recommend it.

Bill

billd5string · 05-28-2013, 04:49 PM

Cool - chevyrestoguy had the exact same thought I did.

BK'66Step · 05-28-2013, 05:02 PM

Thanks guys. I had heard of Captain Fabs adapter plate but I just wasn't sure of the bolt hole locations. Looks like I'll be in touch with him shortly!!

BK'66Step · 05-28-2013, 05:05 PM

And stop drilling the cracks is a great idea! I wouldn't have thought to do that, but I definitely don't want that thing spreading down the road!!

Vernski · 05-28-2013, 05:56 PM

IF you weld in the captains plate you should have -0- problems. That sounds funny doesn't it [the captains plate]...Vernski

61_FL_Apache · 05-28-2013, 06:29 PM

Yep! What they said above!

05-28-2013, 04:20 PM	#1
BK'66Step Registered User Join Date: Sep 2012 Location: Buckley, WA Posts: 72	Any suggestions?? Steering box issue... So as I was taking apart the front end and getting the frame prepped for paint, I took off the steering box and stumbled upon this... The rear-most bolt hole in the frame has been completely sheared out!! Not really sure what the best course of action would be at this point. I plan on putting in power steering but I'm not sure if that requires a special bracket that would require different hole locations. I thought about just hammering it flush and welding it the hole shut and then drilling a new hole, but I'm not sure that would be strong enough for the application... any insight would be much appreciated!! :-) Attached Images

05-28-2013, 04:46 PM	#2
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: Any suggestions?? Steering box issue... I would stop-drill the crack and re-weld it. After that, I would convert the truck to power steering, and use one of Capt Fab's adaptor brackets and have it fully welded in. You'll be good to go after that. __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527

05-28-2013, 04:48 PM	#3
billd5string Registered User Join Date: Apr 2012 Location: Las Vegas, NV Posts: 80	Re: Any suggestions?? Steering box issue... I'd hammer it back, weld it up, and then get the adaptor plate from Captain Fab for a power steering box. Any power steering conversion requires new holes anyway, and you can weld the adaptor plate right onto the frame. I just got done updating mine to power steering, and the plate and instructions from Captain were excellent - I highly recommend it. Bill __________________ 65 C20 Fleetside longbed, 350, turbo 400, 8-lug disc brakes, power steering, air conditioning - Totaled by a guy running a red light. Pulling parts off the carcass for my next truck

05-28-2013, 04:49 PM	#4
billd5string Registered User Join Date: Apr 2012 Location: Las Vegas, NV Posts: 80	Re: Any suggestions?? Steering box issue... Cool - chevyrestoguy had the exact same thought I did. __________________ 65 C20 Fleetside longbed, 350, turbo 400, 8-lug disc brakes, power steering, air conditioning - Totaled by a guy running a red light. Pulling parts off the carcass for my next truck

05-28-2013, 05:02 PM	#5
BK'66Step Registered User Join Date: Sep 2012 Location: Buckley, WA Posts: 72	Re: Any suggestions?? Steering box issue... Thanks guys. I had heard of Captain Fabs adapter plate but I just wasn't sure of the bolt hole locations. Looks like I'll be in touch with him shortly!!

05-28-2013, 05:05 PM	#6
BK'66Step Registered User Join Date: Sep 2012 Location: Buckley, WA Posts: 72	Re: Any suggestions?? Steering box issue... And stop drilling the cracks is a great idea! I wouldn't have thought to do that, but I definitely don't want that thing spreading down the road!!

05-28-2013, 05:56 PM	#7
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: Any suggestions?? Steering box issue... IF you weld in the captains plate you should have -0- problems. That sounds funny doesn't it [the captains plate]...Vernski

05-28-2013, 06:29 PM	#8
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Any suggestions?? Steering box issue... Yep! What they said above! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.