|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-29-2013, 10:20 AM
|
#1 |
|
Registered User
Join Date: May 2013
Location: Pacifica, CA
Posts: 35
|
New to site and classic rebuilds! *Bay Area*
Hey guys, hows it going? I'm from SF bay area and I'm just gettin into restoring a '67 C-10 Step-side that was handed down from my dad.. The body is pretty strait but there was no drivetrain.
I recently dropped at 4 bolt main 350 with 1.94 camel hump heads, with a Crane hyd roller 284/292 duration .509/.528 lift. Edelbrock RPM intake manifold. (That's as far as the motor is done so far) ... all hooked up to a TH350 and a stock rear end 2" Dropped spindles with disk conversion on front. I need a lot of work to make this truck handle this motor, but so far I just want to hear it turn on! Well, I look forward to posting and getting insightful feed back! |
|
|
|
06-20-2013, 09:01 PM
|
#2 |
|
One day...
 
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,243
|
Re: New to site and classic rebuilds! *Bay Area*
 from OKC!
|
|
|
|
|
06-24-2013, 09:46 PM
|
#3 |
|
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: New to site and classic rebuilds! *Bay Area*
Welcome to the forum from SoCal!
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
|
|
|
|
06-27-2013, 10:15 AM
|
#4 |
|
Registered User
Join Date: Oct 2009
Location: Pepperell,Mass
Posts: 724
|
Re: New to site and classic rebuilds! *Bay Area*
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
