TX WTB '85+ GM Squarebody Hydraulic Pedal Set - The 1947 - Present Chevrolet & GMC Truck Message Board Network

modernbeat · 06-13-2013, 09:28 AM

Looking for a GMC-Chevy Squarebody pedal set for a hydraulic clutch master AND hydroboost brakes. This is for my '76 K25.

Not sure what you've got? The easiest way to check is if there are two studs pressed into the pedal bracket that go through the firewall.

Looking for the pedals on the left (Hydro/Hydro). The pedals on the right are vacuum/mechanical.

1968vetL-71 · 06-13-2013, 07:37 PM

I just pulled a hydraulic bell housing setup with slave cylinder, pedal assy, tilt 4spd column, trans and round np205 adapter w/shifter out of an 87 crew 1 ton. Are you needling anything else?
Posted via Mobile Device

modernbeat · 06-13-2013, 08:41 PM

I'm putting a NV4500/NP205 in my '76 using the Advanced Adapters bellhousing and clutch arm. So I don't need the adapters, bellhousing, trans or 205.

But I could use the pedals, all the clutch hydraulics and the tilt-standard column.

The pedals have to be from a hydroboost brakes truck. That's the only catch.

**1774btcrew** · 06-13-2013, 10:34 PM

I have all of that stuff as well as a rebuilt tilt column that would be correct for your 76. I am sure you know that the 87 has the wipers on the column. I need to verify that the pedals are for hydroboost. I have 2 sets I am pretty sure one set is correct for you. Your dash emblem went out yesterday

modernbeat · 06-13-2013, 10:50 PM

Thanks, I forgot about the wiper switch.

Please check the pedals and shoot me a price for the pedals and early column.

**1774btcrew** · 06-13-2013, 11:45 PM

The brake pedals are different on each one. I know one of the pedal assemblies came from a 1 ton so it should be the hydroboost one. I want $150 for it. I will bump the ad up for the tilt column so you can see the pictures

**1774btcrew** · 06-13-2013, 11:49 PM

I just looked and I don't have pictures of the 79-83 style. The big benefit of using these years is they bolt/wire up correctly for your truck and have the double D output shaft so you can use an intermediate shaft with Borgenson joints and get rid of the rag joint at the steering box

modernbeat · 06-19-2013, 08:47 AM

Back up as a reminder to guys that posted or PM'd me.

Get some photos and shipping prices of your pedals to me.

My72BB · 06-19-2013, 08:59 AM

I'm parting a 89 K30 w/Hydroboost...I will have pedal assembly out later today and can get you pictures but mine is a Auto...Is that going to work?

I know you are putting in a manual...are you just needing frame work like in your pics or clutch pedal too?

Alan

**1774btcrew** · 06-19-2013, 11:58 AM

Quote:

Originally Posted by modernbeat

Back up as a reminder to guys that posted or PM'd me.

Get some photos and shipping prices of your pedals to me.

Doing an ad right now with pictures of both pedal assemblies

obijuan · 12-31-2013, 08:30 PM

ever find these?

06-13-2013, 09:28 AM	#1
modernbeat Registered User Join Date: Mar 2011 Location: Dallas, TX Posts: 39	WTB '85+ GM Squarebody Hydraulic Pedal Set Looking for a GMC-Chevy Squarebody pedal set for a hydraulic clutch master AND hydroboost brakes. This is for my '76 K25. Not sure what you've got? The easiest way to check is if there are two studs pressed into the pedal bracket that go through the firewall. Looking for the pedals on the left (Hydro/Hydro). The pedals on the right are vacuum/mechanical.

06-13-2013, 07:37 PM	#2
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set I just pulled a hydraulic bell housing setup with slave cylinder, pedal assy, tilt 4spd column, trans and round np205 adapter w/shifter out of an 87 crew 1 ton. Are you needling anything else? Posted via Mobile Device __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

06-13-2013, 08:41 PM	#3
modernbeat Registered User Join Date: Mar 2011 Location: Dallas, TX Posts: 39	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set I'm putting a NV4500/NP205 in my '76 using the Advanced Adapters bellhousing and clutch arm. So I don't need the adapters, bellhousing, trans or 205. But I could use the pedals, all the clutch hydraulics and the tilt-standard column. The pedals have to be from a hydroboost brakes truck. That's the only catch.

06-13-2013, 10:34 PM	#4
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set I have all of that stuff as well as a rebuilt tilt column that would be correct for your 76. I am sure you know that the 87 has the wipers on the column. I need to verify that the pedals are for hydroboost. I have 2 sets I am pretty sure one set is correct for you. Your dash emblem went out yesterday __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

06-13-2013, 10:50 PM	#5
modernbeat Registered User Join Date: Mar 2011 Location: Dallas, TX Posts: 39	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set Thanks, I forgot about the wiper switch. Please check the pedals and shoot me a price for the pedals and early column.

06-13-2013, 11:45 PM	#6
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set The brake pedals are different on each one. I know one of the pedal assemblies came from a 1 ton so it should be the hydroboost one. I want $150 for it. I will bump the ad up for the tilt column so you can see the pictures __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

06-13-2013, 11:49 PM	#7
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set I just looked and I don't have pictures of the 79-83 style. The big benefit of using these years is they bolt/wire up correctly for your truck and have the double D output shaft so you can use an intermediate shaft with Borgenson joints and get rid of the rag joint at the steering box __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

06-19-2013, 08:47 AM	#8
modernbeat Registered User Join Date: Mar 2011 Location: Dallas, TX Posts: 39	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set Back up as a reminder to guys that posted or PM'd me. Get some photos and shipping prices of your pedals to me.

06-19-2013, 08:59 AM	#9
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set I'm parting a 89 K30 w/Hydroboost...I will have pedal assembly out later today and can get you pictures but mine is a Auto...Is that going to work? I know you are putting in a manual...are you just needing frame work like in your pics or clutch pedal too? Alan

12-31-2013, 08:30 PM	#11
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: WTB '85+ GM Squarebody Hydraulic Pedal Set ever find these?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.