|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-23-2013, 08:48 PM
|
#1 |
|
Registered User
 Join Date: Apr 2011
Location: Ft. Worth, Tx
Posts: 536
|
Water pump pulley Adjustment
As per another thread, I had to move the water pump pulley 3/16" toward the block to have good alignment with the alt and crank pulleys. It really wasn't a difficult thing to do just a PITA because I had to drain the rad and, the fact that you have to pull the back off the pump. I happened to have a make shift press that I had built for something else long ago and, it worked out great. Just had to find the correct spacers to fit it inside. As you can see in the 2nd pic, a drop light I had managed to get close enough to melt the rad shroud...my head got up my......long enough for this to happen. A brand new shroud!! You can bet I won't make that mistake again!
|
|
|
|
08-24-2013, 12:44 AM
|
#2 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Water pump pulley Adjustment
Glad to hear you got that issue resolved. It seems odd that you couldn't find the correct pump.
You should be able to fix that shroud with some fiberglass work.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
08-25-2013, 06:16 PM
|
#3 | |
|
Registered User
Join Date: Apr 2011
Location: Ft. Worth, Tx
Posts: 536
|
Re: Water pump pulley Adjustment
Quote:
It seems odd to me too. I tried at Napa, O'Reilly, and Auto Zone. All the same story. |
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
